Octel 200 Installation And Maintenance Manual page 363

Table 7A-2 EVENT and AUX Activities in Call Process Trace Log (continued)
TYPE EVENT
Column Column
Entry Entry
ONT_IN, SER_NUM
ONT_OUT
ONT_IN, SHDR_REQ
ONT_OUT
ONT_IN, SHDR_RSP
ONT_OUT
ONT_ERR SND_FAIL
LAN
SNMP_QRY
SNMP_SND
STATUS
STATUS
LAN STATUS
(continued)
PB60014–01
DESCRIPTION
Serial number packet sent by the node to
the base server. The serial number (in hex)
is traced in the SOURCE column.
Session header request packet sent by the
base server to the node. The serial number
of the base is in the SOURCE column.
Session header response packet sent by the
node to the base server. The serial number
of the node is in the SOURCE column.
OctelNet packet send failure. An attempt to
prepare or send an OctelNet packet failed.
The reason for the failure is indicated in
the AUX column for encryption failure,
scrambling failure, checksum failure, or
the remote side hanging up. For other
errors, the AUX column is blank.
SNMP information has been requested.
SNMP information has been sent.
Call Processing Trace Activities
AUX
Column DESCRIPTION
Entry
The node is accepting the proposed
ACCEPT
connection.
The node is rejecting the proposed
REJECT
connection.
ENCRPT Encryption failure
Scrambling failure
SCRMBL
Checksum failure
CHKSUM
Remote side hanging up
HANGUP
Digital performance report
001
Network traffic report
002
NO_ANSWR
FAST_BSY
BUSY
EVENT
RINGING
UNAVAIL
TALKOFF
CAMPON
FAILED
CXPORT
SUCCESS
Completed function
COMPLETE
VCU ready to connect
VCUREADY
VCU connected
VCUCONN
FAIL Generic failure
DISKFULL
Mailbox not found
NOTFND
Network name cannot be updated
NONETNAM
Unexpected request
UNEXPREQ
Mailbox full
MBXFULL
NORECORD Mailbox set to no record COS
NetNam Table full
NTNAMFUL
Max message forwarding depth exceeded
FWDDEPTH
ALL_BSY All LCH are busy
Failed because of OEM mismatch
OEM_FAIL
Protocol level not supported
REV_FAIL
Courtesy up/down in progress
COURUPDN
Octel Overture 200/300
7A-11
Serenade 3.0