Octel 200 Installation And Maintenance Manual page 175

6. From telephone A, call out and back in on a trunk dedicated to the hunt group. When the Octel
Overture 200/300 answers, let the message server time out.
7. Does the Octel Overture 200/300 transfer the call to the intercept position?
YES
NO
Message Waiting Test
1. From telephone A, call out and back in on a trunk dedicated to a Octel Overture 200/300 port.
2. Does the Octel Overture 200/300 answer correctly?
YES
NO
3. Make sure that telephone C is busy, by taking it off-hook. Enter the extension number associated
with telephone C.
4. After a predetermined interval, the Octel Overture 200/300 should reconnect, and at telephone A you
should hear, "Extension XXX is busy. Please leave a message at the tone, or enter another extension
number, or press zero for assistance."
5. Leave a test message for telephone C.
.
6. The Octel Overture 200/300 should now initiate a message-waiting-notification call (ASAP message
waiting) to the extension associated with telephone C.
.
7. Does the Octel Overture 200/300 call the extension associated with telephone C?
YES
NO
8. Answer telephone C. The Octel Overture 200/300 should respond with "Extension XXX has X
messages. Ready," or "Extension XXX has X messages. Please enter your security code."
9. Enter the security code, if asked, and press
10. Does the message sound clear?
YES
NO
11. Press
respond with "X messages will be erased" ?
YES
NO
PB60014–01
'
Continue.
'
Determine the cause and correct the problem before continuing.
'
Continue.
'
Determine the cause and correct the problem before continuing.
A message is not delivered to a mailbox unless it is at least 4.5 seconds long. The mailbox
must be entered in the USER Table for the Octel Overture 200/300 to offer to take a message.
If all ports are allowed to make outcalls, the call is not attempted when three-fourths or more
of the ports are being used. Also, for message waiting, INFORMATION Table Index 12 —
MESSAGE WAITING NOTIFICATION, must be set to Y.
'
Continue.
'
Determine the cause and correct the problem before continuing.
'
Continue.
'
Determine the cause and correct the problem before continuing.
3
to Erase the message, then press
'
9
Press to exit the message server. The Octel Overture 200/300 should respond with
"good-bye."
'
Determine the cause and correct the problem.
5
to Listen to the test message.
9
to exit the mailbox. Does the Octel Overture 200/300
Octel Overture 200/300
Installation 4-57
Serenade 3.0