Ftplocaldataport; Ftpmaxport - HP NonStop SSL Reference Manual

If omitted, HP NonStop SSL will *not* allow the illegal 200 response.
Example
FTPCALLOW200REPLY TRUE
Considerations
•
This parameter is relevant only if HP NonStop SSL is running in the FTPC mode.
•
The FTP/TLS specification requires a "234" reply code to the AUTH TLS command. This parameter has been
added to support some older FTP/TLS server with HP NonStop SSL in FTPC mode.

FTPLOCALDATAPORT

Use this parameter to specify how HP NonStop SSL will pick the local data port for the data connection in FTPC mode
with PASSIVE set to true.
Parameter Syntax
FTPLOCALDATAPORT number
Arguments
number
0 for "pick a random port" or any specific port number
Default
If omitted, a value of 0 will be used.
Example
FTPLOCALDATAPORT 20
Considerations
•
This parameter is relevant only if HP NonStop SSL is running in the FTPC mode with PASSIVE set to TRUE
•
Choosing a value other than zero will be firewall-friendly. However, this can result in errors if the remote FTP
server does not choose random data ports itself.

FTPMAXPORT

Use this parameter to specify the maximum port number HP NonStop SSL will use for FTP data connections
Parameter Syntax
FTPMAXPORT number
Arguments
number
The maximum port number HP NonStop SSL will use for FTP data connections
Default
If omitted, HP NonStop SSL will use a value of 41000
Example
FTPMAXPORT 22000
Considerations
56 • Configuration
HP NonStop SSL Reference Manual