Cleaning And Maintenance; Cleaning And Sanitizing Instructions - Hoshizaki DCM-500BAH Instruction Manual

III. Cleaning and Maintenance
CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are
securely in place after any cleaning or maintenance is done to the unit. Make
sure that none have fallen into the storage bin.
A. Cleaning and Sanitizing Instructions
Hoshizaki recommends cleaning and sanitizing this unit at least twice a year. More
frequent cleaning and sanitizing, however, may be required in some existing water
conditions.
1. To prevent injury to individuals and damage to the icemaker, do not use
ammonia type cleaners.
2. Carefully follow any instructions provided with the bottles of cleaning and
sanitizing solution.
3. Always wear liquid-proof gloves and goggles to prevent the cleaning and
sanitizing solutions from coming into contact with skin or eyes.
4. After cleaning and sanitizing, do not use ice made from the cleaning and
sanitizing solutions. Be careful not to leave any solution on the parts or in the
storage bin.
Power Switch
Evaporator Assembly
Storage Bin Cover
Control Switch
Dispense Mode Switch
Extruding Head
Reservoir
Float Switch
Safety Switch
WARNING
WARNING
Spout A
Spout B
Optical Sensors (-OS)
Fig. 9
25
Bin Control Assembly
Agitator
Dispensing
Auger
Agitating Motor
Dispensing Motor
Spout Cover