Thermostat Information - Honeywell Tradeline T8511G Installation Instructions Manual

T8511G,R MICROELECTRONIC HEAT PUMP THERMOSTATS
Key To Test
Press Number
Fan Equipment System-Test (T8511G only)
i
40
41
40
T8511G System Key or T8511R System Switch Operation System-Test
IMPORTANT
Test numbers will only be displayed when the system is configured for the selected function.
EXAMPLE: Numbers 60, 61 and 62 are the only numbers that will be displayed when a system is configured for
heat only.
SYSTEM KEY OR SWITCH SYSTEM-TEST (When system switch is used, move switch to see Test Number.)
i 60
System 61
System 62
System 63
System 64
System 65
FAN KEY SYSTEM-TEST (T8511G only)
Fan 68
Fan 69

Thermostat Information

1. Press the Information i key to access the thermo-
stat information.
2. Press the increase
date code. The first two large digits are the month
and the third digit is the last digit of the year.
(Example: 026 = February 1996)
69-0927—4
Table 4. Installer System-Test Options. (Continued)
Change from cooling to fan equipment system-test.
Fan comes on.
Fan turns off.
Change from fan to key operation system-test.
Heat Test number is displayed. (Set T8511R system switch to HEAT.)
Off Test number is displayed. (Set T8511R system switch to OFF.)
Cool Test number is displayed. (Set T8511R system switch to COOL.)
Auto Test number is displayed.
Emergency heat Test number is displayed. (Set T8511R system switch to EM.HT.)
NOTE: Press system key again to repeat the System Key System-Test.
Fan on Test number is displayed.
Fan off Test number is displayed.
M4864
key to display the production
M4865
Description
3. Press the increase
software identification code.
(Example: 02 = software ID code 2)
4. Press the increase
software revision number.
(Example: 001 = revision number 1)
8
key again to display the
M4866
key again to display the
M6791