Thermostat Information; Outdoor Temperature Sensor - Honeywell T8602C Chronotherm IV Manual

T8602C CHRONOTHERM®IVDELUXE PROGRAMMABLE THERMOSTATS

THERMOSTAT INFORMATION

1. Press the Time A key to access the thermostat
information.
2. Press the increase A key to display the production
date code. The first two large digits are the month
and the third digit is the last digit of the year.
(Example: 027 = February 1997).
3. Press the increase A key again to display the soft­
ware identification code.
(Example: 02 = software ID code 2).
69-1670
4. Press the increase A key again to display the soft­
ware revision number.
(Example: 001 = Revision number 1).
M14613
Press the increase A key again to display the
EEPROM identification code.
(Example: 314 = EEPROM ID 314).
M14614
6. Press the Run Program key to exit the System
Test. The System Test times out after four minutes
without any key presses.
CHECKOUT

Outdoor Temperature Sensor

(Select Models)
Allow the outdoor temperature sensor to absorb the
M14615
outdoor air for a minimum of five minutes before taking a
reading.
10
n r i
■ < - /
LI LI
- ¡ > - 1 3 n j
1 1 3
I I
M14616
M14617