Sound Menu; How To Select The Sound Mode; How To Customize Your Own Sound Status - Haier LE42H330 Owner's Manual

Prog...
DTV Manu.
Contrast
This will adjust the intensity of bright parts in the
picture but keep the dark parts unchanged.
Brightness
This will adjust the light output of the complete
picture, which will mainly affect the darker areas of
the picture.
Color
This will adjust the saturation level of the colors to suit
your personal preference.
Sharpness
This will adjust the sharpness of fine details in the
picture.
Note
❏
The picture options can only be adjusted in the
User mode. The other picture modes are preset.
Tint
Allows you to select the color mix (Tint) of the picture.
Back light
Press / button to adjust the Backlight.
LED Four_DIM
Select the LED Fore-drive_DIM Demo or LED Fore-
drive_DIM Calibration, Press OK to set.(It's not
availabe for LD42K3)
Palette:
Press / to select the Palette option, and then
press OK to enter its submenu, and finally press
/ to select a toner pattern from six patterns
(Cool2, Cool1, Standard, Warm1, Warm2, User) to your
color preference. Normally, the Standard mode is
selected.
If the User mode is selected, press
the palette menu, (as shown in the below figure),
and then press / to select a benchmark in the
LED
Back light
Four_DIM
Intelligent
Mode
/ to enter
Basic Receiving and Playing Operations
range of 2500K~15000K from warm color to cold
color, afterwards press
benchmark is selected for adjustment, the original
adjustment data will be automatically cleared.
Contrast Brightness Color
Picture
Cool2
+50
Sound Volume Balance Digital
Cool1
Channel Programe. Auto Tun. Exchange
Standard
Warm1
Language Menu Time Picture
Function
out
Optimize
-50
Warm2
Adjust
Image Po.. Horizont Wertical.
User
Timer Current.. Off Time Off Time On Channel Remind T.. Remind C..
Reset
Press / to select OK or Cancel..

Sound menu

How to select sound mode
Press MENU button and then use
select Sound menu.
Press OK button and then use
select Digital tone Mode.
Prog... DTV Manu.
Press / button to select the option Standard,
Music, Movie and User.
• You can also press S.MODE button on the remote
control repeatly to select the sound mode you
want. Standard, Music, Movie and User.
How to Customize your own sound
status
Press MENU button and then use
select Sound menu.
LED -LCD television Owner's Manual
/ to adjust; if a different
Back light Reset
Sharpness Tint LED Palette
Four_DIM
SRS AVL MAXX Bass Reset
0
MEMC DSM Background OPC Eye Guard Reset
Mode
Auto.. Clock Phase Reset
MENU OK
/ button to
/ button to
Back light LED Four.
Intelligent Net
Upgrade
Mode
/ button to
15