Initial Setup; Input Source; Navigating The On-Screen Menu - Haier 39G2000 User Manual

INITIAL SETUP
The first time you turn on your TV, the setup wizard
will guide you through setting up basic settings
including the menu language, time zone, and TV
signal source.
1. Press
<!)
to turn on the TV. The setup wizard screen
opens. Press
OK
to start the wizard.
2. Press J;J'f to select Home Mode or Store Mode,
then press
~
to continue.
Note: Home mode is energy saving mode, store mode
is vivid mode.
3. Press
J;.J'f
to select your language, then press
~
to continue.
English
4. Press
Ji../'f
to select your time zone, then press
~
to continue.
:
..
.
.
.
Mountain
5. Press Ji../'f to select your tuner type, then press
~
to start channel scan.
.
.
.
Cable
11
• Air -
Set the signal type to antenna. When set to
Air, the TV can receive analog and digital (ATSC)
broadcasting signals.
• Cable -
Set the signal type to cable. When set to
Cable, the TV can receive analog and QAM
broadcasting signals.
6. The auto channel scan usually takes a few minutes
to complete but can take up to 20 minutes. You can
cancel the channel scan by pressing EXIT.
k"'d·Hi
• During initial setup, press ..,.. to return to the previous
screen and press EXIT to exit the initial setup.
INPUT SOURCE
Press
INPUT
to open the input source list, then press
J;./'f to highlight an input and press
OK
to switch.
INPUT
-
-
m :ll-
HDM11
m:ll-
HDMI2
m:ll-
HDMI3(MHL)
PC
USB
NAVIGATING THE ON-SCREEN MENU
1. Press
MENU
to open the on-screen menu.
2. Press
Ji../'f
to select the main menu (Picture/
Audio/Channel/Setup/Lock), then press
OK
or
~
to enter the sub-menu.
3. Press
Ji../'f
to highlight a sub-menu item, then
press ..,..,~
to adjust the setting or select the
desired option.
4. Press
EXIT
to close the on-screen menu.
k•:t·Hi
• Press MENU to return to the previous menu. lfthe main
menu is displayed, pressing MENU will close the on-
screen menu.