Table of Contents
Advertisement
Basic Receiving and Playing Operations
Press
/
button to select the desired items,
press OK to enter its submenu.
Press
/
button to adjust the setting.
Volume
Press
/
to adjust the volume of TV set.
Balance
This will adjust the output of the right and left
speakers to obtain the best stereo reproduction for
your listening position.
The intermediate value is 0. When indication value of
balance is greater than 0,sound of the right is stronger
than the left. when indication value of balance is less
than 0,the left sound is stronger than the right sound.
Digital tone
This select the modes for sound reproduction dependent
on the broadcast signals or signals from external inputs
received.
Select the mode of sound (User/Standard/Music/Movie).
If the User mode is selected, press
a benchmark in the range of 50~15K from bass to
treble, afterwards press
benchmark is selected for adjustment, the original
adjustment data will be automatically cleared.
Surroud
The surround sound feature expands the audio
listening field wider and deeper to create exceptional
sound quality from the TV's speakers.
AVL (Automatic Volume Limit)
This will reduces the differences in volume level
among broadcasters.
MAXX Bass
To adjust the super bass. Press
bass off, low , high or Medium.
Reset
16 LED -LCD television Owner's Manual
/
to select
/
to adjust, if a different
Back light LED Four..
/
to select super
Return to factory default settings.
Channel menu
Display channel menu by pressing SOURCE button then
use
/
button to select the source of ATV or DTV
item.
Press MENU button and then use
select Channel menu.
Press
/
button to select the desired items,
press OK to enter its submenu.
Prog...
Programme Edit
You can add a label to a channel to make it easier to find.
Press MENU button and then use
select Channel menu.
Manual Search
to select the Search option, and finally
Press
/
press
/
to start manual search. Upon finding a
program, the search will automatically stop, and the
program will be stored onto the current channel.
You may stop the search by pressing OK or MENU .
Fine Tune
Press
/
to select the Fine Tune option, and
then press
/
to start UP or DOWN fine tuning
until obtaining a relatively good picture effect. The
fine tuning function is for the purpose of improving
picture effect through fine tuning when that of a
certain program is not good enough. Normally, the
optimal picture effect can be obtained without fine
tuning when watching TV programs, and fine tuning
is to meet the need of adjusting a certain program.
/
button to
Back light LED Four...
DTV Manu...
Intelligent
Net
Mode
Upgrade
/
button to
Advertisement
Table of Contents
