Quantum Rehab 610 Owner's Manual
  1. Manuals
  2. Brands
  3. Quantum Rehab Manuals
  4. Wheelchair
  5. Quantum 610
  6. Owner's manual

Quantum Rehab 610 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
1-800-800-8586 (Exeter, PA) • 1-888-570-1113 (St. Catharines, ON) • www.quantumrehab.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 610 and is the answer not in the manual?

Questions and answers

Related Manuals for Quantum Rehab 610

Summary of Contents for Quantum Rehab 610

  • Page 1 1-800-800-8586 (Exeter, PA) • 1-888-570-1113 (St. Catharines, ON) • www.quantumrehab.com...
  • Page 2 PROHIBITED! These actions should be prohibited. These actions should not be performed at any time or in any circumstances. Performing a prohibited action can cause injury to personnel and/ or damage to equipment (black symbol with red circle and red slash). Copyright © 2006 Pride Mobility Products Corp. INFMANU2924/RevB/January06 www.quantumrehab.com Quantum 610...

  • Page 3: Table Of Contents

    This owner’s manual is compiled from the latest specifications and product information available at the time of publication. We reserve the right to make changes as they become necessary. Any changes to our products may cause slight variations between the illustrations and explanations in this manual and the product you have purchased. Quantum 610 www.quantumrehab.com...

  • Page 4: Introduction

    We want to hear your questions, comments, and suggestions about this manual. We would also like to hear about the safety and reliability of your new power chair, and about the service you received from your Quantum Rehab Specialist. Please notify us of any change of address, so we can keep you apprised of important information about safety, new products, and new options that can increase your ability to use and enjoy your power chair.
  • Page 5 These message boards invite you to communicate with other Pride customers as well as Pride represen- tatives who are available to assist you with any questions or concerns you may have. My Quantum Rehab Specialist: Name:_____________________________________________________________________________________ Address:___________________________________________________________________________________...
  • Page 6 T T T T T = Terminal Post Connect Red wire to T T T T T with + + + + + Connect Black wire to T T T T T with – – – – – www.quantumrehab.com Quantum 610...
  • Page 7 Prevent personal injury and equipment damage. Do not connect an extension cord to the AC/DC converter or the battery charger. EMI-RFI - This product has been tested and passed at an immunity level of 20 V/m. Quantum 610 www.quantumrehab.com...

  • Page 8: Safety

    Pride has designed and engineered your power chair to provide maximum mobility and utility. A wide range of accessories is available from your Quantum Rehab Specialist to further customize your power chair to better suit your needs and/or preferences. However, under no circumstances should you modify, add, remove, or disable any feature, part, or function of your power chair.

  • Page 9: Your Power Chair

    WARNING! When on any sort of an incline or decline, never place the power chair in freewheel mode while seated on it or standing next to it. Doing so may result in personal injury and/or damage to your power chair. WARNING! Never travel down an incline backwards. This may result in personal injury. Quantum 610 www.quantumrehab.com...
  • Page 10 WARNING! If you anticipate being seated in a stationary position for an extended period of time, turn off the power. This will prevent unexpected motion from inadvertent joystick contact. This will also eliminate the possibility of unintended chair movement from electromagnetic (EM) sources. Failure to do so may result in personal injury. www.quantumrehab.com Quantum 610...
  • Page 11 Power chairs are not designed to travel up or down stairs or escalators. Always use an elevator. WARNING! Never use your power chair to negotiate steps or escalators. You may cause injury to yourself and to others and/or damage your power chair. Quantum 610 www.quantumrehab.com...
  • Page 12 If you will be traveling with your power chair, you may find it necessary to use a lift/elevation product to aid in transporta- tion. Pride recommends that you closely review the instructions, specifications, and safety information set forth by the manufacturer of the lift/elevation product before using that product. www.quantumrehab.com Quantum 610...
  • Page 13 Failure to do so may result in personal injury and/or damage to your power chair. Positioning Belts Your Quantum Rehab Specialist, therapist(s), and other healthcare professionals are responsible for determining your requirement for a positioning belt in order to operate your power chair safely.
  • Page 14 WARNING! Do not operate your power chair while you are under the influence of alcohol, as this may impair your ability to operate your power chair in a safe manner. www.quantumrehab.com Quantum 610...
  • Page 15 NOTE: For further information on EMI/RFI, go to the Resource Center on www.pridemobility.com. If unin- tended motion or brake release occurs, turn your power chair off as soon as it is safe to do so. Call Pride at 800- 424-8205 to report the incident. Quantum 610 www.quantumrehab.com...
  • Page 16 THE QUANTUM 610 The Quantum 610 has two main assemblies: the seat assembly and the power base assembly. See figure 5. Typically, the seat assembly includes the armrests, seatback, and seat base. The power base assembly includes two motor/brake assem- blies, two drive wheels, four caster wheels, two batteries, and wiring harnesses.
  • Page 17 I I I . Y O U R P O W E R C H A I R QUANTUM 610 SPECIFICATIONS Suspension: Active-Trac Extreme (ATX) Drive Wheels: 10 in., pneumatic (10 in. solid optional) Front Caster Wheels: 5 in., solid Rear Caster Wheels: 6 in., solid...
  • Page 18 TRAPEZE BARS FRONT COVER MOTOR/BRAKE ASSEMBLY Figure 6. The Quantum 610 Power Base ELECTRICAL COMPONENTS The electrical components are located inside the power base. The ammeter and the charger power cord receptacle for the optional onboard charger are located on the right side of the power base. The main circuit breaker is located on the front of the battery tray.
  • Page 19 CHARGER CIRCUIT FUSE BATTERY CONTROLLER CONNECTOR CONNECTOR MOTOR CONNECTORS BATTERY MOTOR CONNECTOR CONNECTORS VSI CONTROLLER ONBOARD BATTERY CHARGER CHARGER POWER CORD RECEPTACLE MAIN CIRCUIT BREAKER AMMETER Figure 7. Quantum 610 Electrical Components (Shown With Optional Onboard Battery Charger) Quantum 610 www.quantumrehab.com...
  • Page 20 C H A I R Manual Freewheel Levers The Quantum 610 has a manual freewheel lever on each motor. Manual freewheel levers enable you to disengage the drive motors from the gearboxes and maneuver the chair manually. WARNING! Do not use the power chair while the drive motors are disengaged! Do not disengage...

  • Page 21: Assembly

    Replacement nylon insert lock nuts are available at local hardware stores or through your Quantum Rehab Specialist. ARMREST ANGLE ADJUSTMENT SEAT INSTALLATION SEAT HEIGHT/ANGLE ADJUSTMENT CONTROLLER POSITION FOOT PLATFORM ANGLE ADJUSTMENT FOOT PLATFORM HEIGHT/DEPTH ADJUSTMENT Figure 10. Quantum 610 Assembly View (Universal Mounting System Shown) Quantum 610 www.quantumrehab.com...
  • Page 22 8. Route the controller cable so that it cannot be pinched in the seat hinge. 9. Secure the controller cable to the armrest receiver with wire ties. See figure 13. Figure 12. Remote Plus Controller Routed on a Synergy Seat www.quantumrehab.com Quantum 610...
  • Page 23 7. Install the controller. NOTE: Refer to V. “Comfort Adjustments” for more in- Figure 13. Remote Plus Controller Routed on a formation on controller installation and adjustment. Contour Seat FRICTION LOCK LEVER POWER SEAT ACTUATOR Figure 14. Power Seat Actuator Quantum 610 www.quantumrehab.com...

  • Page 24: Comfort Adjustments

    WARNING! If your power chair was configured by your Quantum Rehab Specialist, please consult your healthcare professional before changing the seat position or making any other adjustment. Some adjustments may degrade your power chair’s performance and safety by changing its center of gravity.
  • Page 25 The lever is located on the right side of the seat base. ARMREST KNOB To adjust the recline angle: 1. Pull up on the seatback release lever. 2. Lean forward or backwards to the desired position. 3. Release the lever. Figure 18. Seatback Angle Adjustment Quantum 610 www.quantumrehab.com...
  • Page 26 See figure 20. 8. Route the controller cable to the back of the power base and plug in the controller. See figure 12. 9. Use wire ties to secure the controller cable to the seat frame. See figure 13. www.quantumrehab.com Quantum 610...
  • Page 27 You can adjust the angle of the foot platform with a hex key. JAM NUT SETSCREW To adjust the foot platform angle: 1. Flip up the foot platform and locate the setscrew and Figure 23. Underside of Foot Platform jam nut. See figure 23. Quantum 610 www.quantumrehab.com...
  • Page 28 LEG REST ADJUSTMENT SCREWS Heavy Duty Drop-in Leg Rests You can adjust the forward/back position, as well as the length of the heavy duty drop-in leg rests. See figure 26. Figure 26. Heavy Duty Drop-In Leg Rests www.quantumrehab.com Quantum 610...
  • Page 29 3. Tighten the hardware. To change foot plate angle (D): 1. Turn the setscrew clockwise to decrease the angle. 2. Turn the setscrew counterclockwise to increase the angle SETSCREW LOCATION Figure 27. Multi-Axis Foot Plate (ELR Shown) Quantum 610 www.quantumrehab.com...
  • Page 30 NOTE: For more information on operating the power el- evating seat through the controller, contact your Quantum Rehab Specialist. WARNING! The power elevating seat option is Figure 28. Power Seat Toggle Switch intended for use on a level surface only.

  • Page 31: Batteries And Charging

    BATTERIES AND CHARGING The Quantum 610 uses two long-lasting, 12-volt, deep-cycle batteries. These batteries are sealed and maintenance free. Since they are sealed, there is no need to check the electrolyte (fluid) level. Deep-cycle batteries are designed to handle a longer and deeper discharge.
  • Page 32 3. Give the batteries another full charge of 8 to 14 hours and operate your power chair again. The batteries will now perform at over 90% of their potential. 4. After four or five charging cycles, the batteries will top off at 100% charge and last for an extended period. www.quantumrehab.com Quantum 610...
  • Page 33 (e.g., an automotive battery charger). NOTE: Your power chair’s charger will not operate after the batteries have been discharged to nearly zero voltage. If this happens, call your Quantum Rehab Specialist for assistance. How often must I charge the batteries? Many factors come into play when deciding how often to charge the batteries.
  • Page 34 What about shipping? If you wish to use a freight company to ship your power chair to your final destination, repack your power chair in the original shipping container and ship the batteries in separate boxes. www.quantumrehab.com Quantum 610...

  • Page 35: Operation

    Keypad The keypad is located in front of the joystick. It contains keys necessary to operate your power chair. See figure 30. Figure 29. FLIGHT Controller Horn Key The horn key activates the horn. Quantum 610 www.quantumrehab.com...
  • Page 36 1. While the FLIGHT is locked, press the on/off key to turn on the FLIGHT. All LEDs will flash briefly. The LEDs will then slowly ripple from right to left. 2. Press the horn key twice before the LED ripple has completed, approximately 10 seconds. The FLIGHT is now unlocked. www.quantumrehab.com Quantum 610...
  • Page 37 You may use an off-board charger to charge the power chair batteries through the 3-pin socket located on the front of the FLIGHT. If you use an off-board charger, the charger current should not exceed 8 amps. Contact your Quantum Rehab Specialist for more information.
  • Page 38 Figure 31. VSI Controller (Optional 6-Key Shown) complete stop. WARNING! If your power chair begins to move in an unexpected manner, immediately release the joystick. Unless the joystick is damaged, this action should stop your power chair. www.quantumrehab.com Quantum 610...
  • Page 39 The speed setting or drive profile is displayed on the maximum speed/profile indicator. If your power chair was programmed with a drive profile, contact your Quantum Rehab Specialist for more information.
  • Page 40 4. Release the joystick. There should be a long beep. 5. The VSI is now unlocked. NOTE: If the above procedure fails to either lock or unlock the VSI, contact your Quantum Rehab Specialist. Off-board Charger/Programming Socket The off-board charger/programming socket is located on the front of the VSI. If you use an off-board charger, the charger current should not exceed 8 amps.
  • Page 41 If the connections are good, try charging the batteries. The left motor has a bad connection. Check the left motor connection. The left motor has a short circuit to a battery connection. Contact your Quantum Rehab Specialist.
  • Page 42 WARNING! Unless faced with an emergency situation, do not use the on/off key to stop the chair. This will cause the power chair to stop abruptly. WARNING! Always turn the power off when you are stationary to prevent unexpected movement. www.quantumrehab.com Quantum 610...
  • Page 43 “ripple up and down of lights,” turn off the controller and allow the joystick to return to the neutral position. Then turn on the controller. NOTE: If you still get “ripple up and down of lights,” contact your Quantum Rehab Specialist. Quantum 610...
  • Page 44 Power Accessories (Optional) If your power chair is equipped with power accessories such as power elevating leg rests, you can operate them through the keypad. Contact your Quantum Rehab Specialist for information on how to operate these accessories. Off-board Charger/Programming Socket The off-board charger/programming socket is located on the front of the Remote Plus.
  • Page 45 Error codes are displayed as a number of flashing lights. For instance, if the first light is flashing rapidly, the battery voltage is nearly depleted. The table below identifies the individual error codes, probable causes, and possible solutions. If you get one of these error codes, contact your Quantum Rehab Specialist. FLASHING LIGHTS DIAGNOSIS AND SOLUTION The batteries need charging or there is a bad connection to the batteries.
  • Page 46 WARNING! If your power chair begins to move in an unexpected manner, immediately release the joystick. Unless the joystick is damaged, this action should stop your power chair. Figure 35. Microdrive Controller with Joystick Interface Module www.quantumrehab.com Quantum 610...
  • Page 47 “ripple up and down of lights,” turn off the controller, allow the joystick to return to the neutral position, then turn on the controller. NOTE: If you still get “ripple up and down of lights,” contact your Quantum Rehab Specialist. NOTE: When the batteries approach a discharged state, the first red light will begin to slowly flash, reminding you the...
  • Page 48 Error codes are displayed as a number of flashing lights. For instance, if the first light is flashing rapidly, the battery voltage is nearly depleted. The following table identifies the individual error codes, probable causes, and possible solutions. If you get one of these error codes, contact your Quantum Rehab Specialist. www.quantumrehab.com...
  • Page 49 SOLUTION High Battery Voltage Check batteries. Solenoid Brake Fault Check motor/brake wiring. Possible Controller Fault See Quantum Rehab Specialist. Possible Joystick Fault See Quantum Rehab Specialist. Inhibit Active Unplug charger. Check connections. Right Motor Wiring Fault Check right motor wiring.

  • Page 50: Care And Maintenance

    M A I N T E N A N C E CARE AND MAINTENANCE Your Quantum 610 is a sophisticated power chair. Like any motorized vehicle, it requires routine maintenance checks. You can perform some of these checks, but others require assistance from your Quantum Rehab Specialist. Preventive mainte- nance is very important.
  • Page 51 ! Ensure that all parts of the controller system are securely fastened to your power chair. Do not overtighten any screws. ! Check for proper tire inflation. There should be 35 psi (2.4 bar) in each tire. If a tire does not hold air, see a Quantum Rehab Specialist for replacement of the tube.
  • Page 52 WASHER WASHERS Figure 37. Quantum 610 Drive Wheel Figure 38. Quantum 610 Drive Wheel Disassembled Follow these easy steps for a quick and safe repair for both pneumatic and solid tires: 1. Turn off the power to the controller. 2. Set the power chair up on blocks.
  • Page 53 14. Slide the battery tray back into the power base. 15. Connect the battery harness to the rear battery. 16. Reinstall the front cover. 17. Reinstall the rear shroud and tighten the fasteners. 18. Charge the batteries. See VI. “Batteries and Charging.” Quantum 610 www.quantumrehab.com...
  • Page 54 V I I I . C A R E A N D M A I N T E N A N C E REAR SHROUD FASTENERS BATTERY WIRING DIAGRAM LABEL REAR SHROUD FRONT BATTERY REAR BATTERY Figure 39. Battery Installation www.quantumrehab.com Quantum 610...
  • Page 55 When to See Your Quantum Rehab Specialist for Service The following symptoms could indicate a serious problem with your power chair. If necessary, contact your Quantum Rehab Specialist. When calling, have the model number, serial number, nature of the problem, and the error code if available.

  • Page 56: Warranty

    Pride to be defective in material and/or workmanship: ! Bearings and bushings ! Plastic components, except body The battery is covered by a separate six-month warranty, provided by the battery manufacturer. The batteries are not warranted by Pride. www.quantumrehab.com Quantum 610...
  • Page 57 SERVICE CHECKS AND WARRANTY SERVICE Warranty service must be performed by a Quantum Rehab Specialist. Do not return faulty parts to Pride without prior written authorization. All transportation costs and shipping damage incurred while submitting parts for repair or replacement are the responsibility of the purchaser.
  • Page 58 N O T E S www.quantumrehab.com Quantum 610...
  • Page 59 Thank you for making the Quantum 610 your choice in power chairs. Quality Control - Quantum 610 We have thoroughly inspected your Inclusion of all Parts Fit and Finish Quantum 610. The following check Joystick Serial Number Performance marks indicate...

Table of Contents