System Specifications; Amplifier Section - Genelec F One Operating Manual

SYSTEM SPECIFICATIONS

Free field frequency response (± 3 dB)
Maximum short term sine wave SPL output
averaged from 40 to 85 Hz, measured in half
space at 1 meter
Self generated noise level in half space at 1 m
on axis (A-weighted)
Driver, magnetically shielded
Weight
Dimensions
Height
Diameter

AMPLIFIER SECTION

Amplifier short term output power
(Long term output power is limited by driver
unit protection circuitry)
Amplifier system THD at nominal output
Mains voltage
Power consumption (average)
Stand by
Idle
Full output
CONNECTORS
F One
Main 35 Hz...85 Hz
RCA input connectors
LFE 35 Hz...120 Hz
RCA output connectors
98 dB
Stereo IN 3.5 mm Jack female connector
Input impedance
Main channel OUT gain referred to IN
≤ 15 dB SPL
165 mm (6 / ")
1
2
6.3 kg (13.9 lb)
251 mm (9 / ")
7
8
305 mm (12")
CROSSOVER SECTION
F One
40 W
Subsonic filter (18 dB/octave) below
Crossover frequency
(subwoofer/main channels)
≤ 0.05 %
LFE channel cutoff frequency
100, 120 or 230 V
Midband rejection >400 Hz
Input level for 90 dB SPL output at 1 m
<0.5 W
7 W
Sensitivity adjustment range
70 W
Bass Roll-Off control operating range
in 2 dB steps
Phase matching control in 90° steps
F One
6 (5 + LFE)
5
1
10 kOhm balanced
0 dB
F One
35 Hz
85 Hz
120 Hz
>50 dB
-9 dBu at level control max
18 dB
From 0 to -6 dB @ 35 Hz
From 0 to -270° @ 85 Hz