Promaster LED30 Instructions

Camera/Camcorder Light
LED30
Thank you for purchasing the PROMASTER
Please read the following instructions before use.

Installing the Batteries

Gently remove the cover on the back of the light.
Insert 2 AA batteries (not included) into the battery compartment.
Be sure to observe the correct polarity (+,-) as indicated.
After the batteries are properly installed, use the on/off switch to power the light.

Mounting the LED30 Light

You can mount your LED30 Camera/Camcorder light to the built-in accessory shoe on your camera or camcorder. If your camera or
camcorder does not have an accessory shoe, use the included mounting bracket as follows:
Connect screw (A) to the tripod mount of your camcorder/camera.
Slide your light into the accessory shoe (B) of the bracket

Specifications

Light source:
Beam angle:
Luminance:
Color rendering index:
Color temperature:
LED longevity:
Power input:
Housing size(mm):
Weight(g):
Code 7193
Made in China
www.promaster.com
Fairfield, CT 06611
®
LED30 Camera/Camcorder Light.
30-5mm super bright LED lamps
60°
23 Lux @ 10'
≥85
5600K
>10000h
AA Battery × 2
100 x 45 x 32
60
B A