GE X2600 Power PRO Series User Manual page 45

Message
Image cannot be saved, improper
alignment. Please try again.
Firmware update failed.
Firmware version mismatch.
Warning! Do not turn off your
camera during update!
Remove USB Cable!
Connection Failed!
44
Description
The saved panoramic pictures cannot be stitched.
The camera cannot be updated during the firmware
update process.
The firmware version does not match during the
firmware update process.
The message appears during the firmware update
process.
Indicates that you can disconnect the USB cable.
Failure to connect to your PC, printer, TV (with HDMI).
Action
Retry taking the panoramic
picture. The message will
disappear after 2 seconds.
The camera will shut down in 2
seconds.
The message will disappear after
2 seconds.
The message disappears after the
camera update and restart.
The message disappears after you
disconnect the USB cable.
Remove USB cable and retry
connection