Storing Pictures On An Sd/Sdhc Card - GE X2600 Power PRO Series User Manual

Storing Pictures on an SD/SDHC Card

Your camera has enough internal memory for a couple of
test pictures. We highly recommend purchasing a Class 4 or
higher SD/SDHC Card (up to 32 GB) to conveniently store more
pictures/videos. (Card class is typically shown on the card
and/or packaging)
NOTE: Your camera also accepts EYE-FI Cards (type X2). To
learn more, go to www.eye.fi
A card can only be inserted one way; forcing it in the
wrong way may cause damage. Inserting or removing a
card while the camera is on may damage the pictures,
card, or the camera.
1 While the camera is turned off, open the battery compart-
ment door.
2 Insert an SD card into the SD card slot and push it in until it
clicks into place. To remove an SD card, press the SD card
to release it, and then remove it from the card slot.
IMPORTANT: When you turn on the camera, it checks to see if a
card is inserted. If pictures/videos are detected on the internal
memory, the camera will prompt you to move them to the SD
card. New pictures/ videos will be stored on the SD card.
9