Rf Output Switch - Sylvania DVR91VG Owner's Manual

Error message
Recording Error
You cannot record more than 99
titles on one disc.
(The maximum is 99)
Recording Error
You cannot record more than
999 chapters on one disc.
(The maximum is 999)
Recording Error
You cannot record on this disc
as Control Information is full.
Recording Error
You cannot record on this disc
as Power Calibration Area is
full.
Recording Error
This disc is already finalized.
* If you are still having trouble with this unit after checking Troubleshooting, write down the error code and the
error description, and call our helpline mentioned on the front page to locate an Authorized Service Center.
You can watch the TV programs
with the tuner of the unit. (Usually
channel 3 or 4 of the TV is
available for the RF converter
setting.) Be sure to connect the
unit to a TV using the RF cable.
Refer to page 14.
1
Select channel 3 on your TV.
2
Press [VIDEO/TV] on the remote
control.
• If noise appears, change the
RF output channel of the unit to
CH 4 by pressing [VIDEO/TV]
for 3 seconds. The RF output
channel will alternate between
CH3 and CH4 as follows.
Others
Troubleshooting (cont'd)
xxxx
Cause
You are trying to record onto the disc
on which the number of recording
titles comes up to the maximum (99).
You are trying to record onto the VR
mode DVD-RW disc on which the
number of recording chapters comes
up to the maximum (999).
This disc has no space to write the
Control Information when recording
or deleting contents.
When editing has been repeatedly
performed, the control Information
area may come up to be full even the
recording area has enough space.
When recordings are performed
repeatedly onto an unstable disc, this
area may come up to be full.
Every time you insert a disc for
recording, the disc's working area will
be taken up. And if you repeat this
frequently, it will be used up sooner
and you may not be able to record
full 99 titles.
You are trying to record onto
the disc already finalized.

RF output switch

POWER OPEN/CLOSE
T-SET TIMER PROG.
.@/:
ABC DEF
1 2 3
CH
GHI JKL MNO
4 5 6
PQRS TUV WXYZ VIDEO/TV
7 8 9
DISPLAY SPACE CLEAR SETUP
0
TOP MENU MENU/LIST RETURN ENTER
for more than
3 seconds
REC/OTR DVD REC/OTR
VCR
REC SPEED PLAY
3 seconds
x1.3/0.8 SKIP PAUSE SKIP
( RF on ) CH4
SLOW CM SKIP STOP SEARCH
3 seconds
DUBBING ZOOM AUDIO
( RF on ) CH3
3 seconds
CH4
( RF on )
3 seconds
Solution
Delete unnecessary titles
(pages 54, 57).
Delete unnecessary chapter markers
(page 66).
Delete unnecessary titles
(pages 54, 57).
Insert a new disc.
Release the finalizing for this
disc (page 36).
• Each time the RF output
channel is changed, CH3 or
CH4 will appear on the front
panel display.
81
EN