PRESONUS FP10 User Manual page 10

OPERATION
Windows Vista only
Click 'Install this driver software anyway' to
continue.
Click 'Don't install this driver software' to exit
setup.
Windows XP only
Click [Continue Anyway] to continue.
Click [STOP Installation] to cancel and setup.
4) Connect your FP10 to your computer using the
included FireWire cable and turn it on.
Click [Next >] to continue.
Multiple FP10's only
Before connecting your FP10 units to your
computer, connect them together in series (daisy-
chain) via FireWire.
Then connect the chain to your computer using
only one of the available FireWire ports at either
end of the FP10 chain.
NOTE: The FP10 can be chained to the PreSonus
FirePod. However, you must first update your
FirePod's firmware. Please contact Technical
Support for assistance with this update procedure.
8 | PreSonus 2007