Electrical Service Guide For 230 Vac Model; Installing Wire Spool And Adjusting Hub Tension - Hobart Welding Products Handler 140 Owner's Manual

5-8. Electrical Service Guide For 230 VAC Model

Input Voltage
Input Amperes At Rated Output
Max Recommended Standard Fuse Or Circuit Breaker Rating In Amperes
Min Input Conductor Size In AWG
Max Recommended Input Conductor Length In Feet (Meters)
Min Grounding Conductor Size In AWG
Reference: 1999 National Electrical Code (NEC)
1 Choose a circuit breaker with time-current curves comparable to a Time Delay Fuse.
2 "Time-Delay" fuses are UL class "RK5" .
3 "Normal Operating" (general purpose − no intentional delay) fuses are UL class "K5" (up to and including 60 amp), and UL class "H" ( 65 amp and
above).

5-9. Installing Wire Spool And Adjusting Hub Tension

Installing 8 in (203 mm) Wire Spool
Tools Needed:
Circuit Breaker
Installing 4 in (102 mm) Wire Spool
Adapter used with
8 in (203 mm)
spool only.
Retaining ring used
with 8 in (203 mm)
spool only.
1/2 in
1 2
, Time-Delay
3
Normal Operating
When a slight force is needed
to turn spool, tension is set.
When a slight force is needed
to turn spool, tension is set.
230
20
25
30
14
67
(20)
14
803 012 / 803 013 -B / Ref. 802 971-C
OM-925 Page 17