Page 1
J5242 Product features and decoration may vary from the photograph. Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Requires three "AA" batteries (included). Tools needed for assembly: Phillips Screwdriver, Hammer and Scrap Block of Wood (not included).
Page 3
Straight Axle Cap Nut Cap Nut Assembly Tool Scrap Block of Wood • Fit a cap nut into the cap nut assembly tool. Place one end of the straight axle into the cap nut. • Tap the end of the straight axle with a hammer. Make sure the cap nut is securely attached to the straight axle.
Page 4
Pedal Hubs Pedal Axle Hole • While holding the pedal hubs on the pedal axle, insert the pedal axle through the hole in the center of the front wheel. • Push the pedal hubs into the center of the front wheel until they are flush with the surface of the front wheel.
Page 5
FIRST, Insert the screw so that " is Handlebar visible. THEN, tighten the screw. " Fork Cover Rear of Trike • Insert the fork post up through the hole in the neck of the frame. Make sure the fork is positioned so that the fork covers face the rear wheels.
Label Decoration (Place label 4 on opposite side) on opposite side) (Place remaining label 9’s on opposite side of front wheel) SIDE VIEW DASH VIEW Proper label application will help to keep the labels looking their best! • Wash your hands before applying the labels. •...
Removing the Seat Seat Retainer Tab Seat Retainer Tab • Turn the frame on its side. • Squeeze the seat retainer tabs toward one another and lift the seat from the frame. Battery Safety Information In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product.
Let's Go! WARNING To avoid serious injury: • Adult supervision is required. • Never use near cars and other motor vehicles, near streets, steps, sloped driveways, hills, roadways, alleys, swimming pools or other bodies of water. • Always wear shoes or sneakers. •...