Electrical Data - Friedrich Kuhl SQ05N10 Series Service Manual

Q chassis models 115 volt
Hide thumbs Also See for Kuhl SQ05N10 Series:
Table of Contents

Advertisement

ELECTRICAL DATA

Wire Size
Fuse/Circuit Breaker
Grounding
*HACR: Heating Air Conditioning and Refrigeration
WARNING
ELECTRIC SHOCK HAZARD
Turn off electric power before service or
installation.
All electrical connections and wiring MUST be
the National Electrical Code and all local codes
death.
NOTICE
FIRE HAZARD
electically unsafe conditions which could cause moderate
or serious property damage.
Read, understand and follow the above warning.
Use ONLY wiring size recommended for single outlet branch circuit.
Use ONLY the correct HACR type and size fuse/circuit breaker. Read electrical ratings on unit's
rating plate. Proper circuit protection is the responsibiity of the homeowner.
Unit MUST be grounded from branch circuit through service cord to unit, or through separate
ground wire provided on permanently connected units. Be sure that branch circuit or general
purpose outlet is grounded.
Do NOT alter the service cord or plug. Do NOT use an extension cord. Refer to the table above
for proper receptacle and fuse type.
C
US
7

Advertisement

Table of Contents
loading

Table of Contents