Link Tags; Input Tags - Polycom SIP 2.2.0 Developer's Manual

Link Tags

Note

Input Tags

<!--...-->
The comment tag is used to insert a comment in the source code. A comment
will be ignored by the browser. You can use comments to explain your code,
which can help you when you edit the source code at a later date.
This tag does not have any attributes.
The following link tag is supported:
• <a>—Defines an anchor
The Microbrowser supports both http:// and tel:// URL schemes. When a tel://
URL is selected, the phone switches to the telephony application and dials the
number specified in the URL. Currently the number is dialed as-is, however, full
support for tel:// URL parsing as specified in RFC 2806 will be available in a future
release.
sip:// URLs are not supported at this time.
<a>
The <a> tag defines an anchor. An anchor can be used to create a link to
another document by using the href attribute.
The following attributes are supported:
Attribute Value/s
href URL (Ex:" www.polycom.com")
name section_name
The following input tags are supported:
• <form>—Defines a form
• <input>—Defines an input field
Application Development
Description
The target URL of the link
Names an anchor. Use this
attribute to create a bookmark in a
document.
In future versions of XHTML the
name attribute will be replaced by
the id attribute.
Note: This attribute is parsed, but
not used.
2 - 3