Polycom SIP 2.2.0 Developer's Manual page 10

Developer's Guide SoundPoint IP / SoundStation IP
Note
Note
1 - 4
Depending on the type and complexity of the application, you might use one
of the following tools for creation:
• Text editor
• XML editor
• Microsoft Word
When designing applications, you might want to consider the following
guidelines:
These guidelines are for your information only. You are solely responsible for
determining the suitability and applicability of this information to your needs.
1. Spend sufficient time designing the application by:
— Developing a conceptual design
— Describe all user-application interactions
— Plan for all user types
2. Create standardized applications to assist in:
— Lowering design time
— Speed up debugging
— Increasing usability
3. Promote consistent output and predictable user input.
4. Create a prototype application to test on sample users.
5. Thoroughly test your application before releasing to:
— Identify all user interface issues
— Verify that all error conditions are caught cleanly
For step-by-step instructions on how to develop an XHTML application that
can be run on the Microbrowser of all SoundPoint IP and SoundStation IP
phones, refer to Application Development
Polycom is not responsible for troubleshooting any programming that you create for
the Microbrowser.
on page 2-1.