Fantec MR-35DU3 User Manual page 6

LED condition:
Switch on power and insert two HD in terms of different working pattern
PATTERN HDD carries on the self-checking
RAID0 HDD1 and HDD2 LED flashing in
turn with purple lights.
Self- checking completes when LED
shows blue light
RAID1 HDD1 and HDD2 LED flashing in
turn with purple lights.
Self- checking completes when LED
shows blue light
JBOD HDD1 and HDD2 LED flashing in
turn with purple lights.
Self- checking completes when LED
shows blue light
BIG HDD1 and HDD2 LED flashing in
turn with purple lights.
Self- checking completes when LED
shows blue light
After power on and insertion of one or two HD the following LED states appear after a
HD failure.
(In this example HDD1 is normal and HDD2 is damaged, otherwise vice versa)
PATTERN HDD carries on the self-checking
RAID0 HDD1 and the HDD2 LED flashing
in turn with purple lights. Self
checking completes when the
HDD1 LED shows blue light, and
the HDD2 LED goes out.
RAID1 HDD1 and the HDD2 LED flashing
in turn with purple lights. Self
checking completes when the
HDD1 LED shows blue light, and
the HDD2 LED goes out.
JBOD HDD1 and the HDD2 LED flashing
in turn with purple lights. Self
checking completes when the
HDD1 LED shows blue light, and
the HDD2 LED goes out.
BIG HDD1 and the HDD2 LED flashing
in turn with purple lights. Self
checking completes when the
HDD1 LED shows blue light, and
the HDD2 LED goes out.
Data transmission
During Data transmission: The
HDD1 and the HDD2 LED flashing
with purple light. The Data
transmission completes when LED
shows the blue light
During Data transmission: The
HDD1 and the HDD2 LED flashing
with purple light. The Data
transmission completes when LED
shows the blue light
During Data transmission:
LED flashing with purple light while
operating different HDD. The Data
transmission completes when LED
shows the blue light
During Data transmission: The
HDD1 and the HDD2 LED flashing
with purple light. The Data
transmission completes when LED
shows the blue light
Data transmission
No transmission possible
Under the Data transmission
condition: The HDD1 LED flashing
with purple light, and the HDD2
LED flashing in turn with purple
lights. The Data transmission
completes when HDD1 LED shows
blue light and the HDD2 LED goes
out.
Under the Data transmission
condition: The HDD1 LED flashing
with purple light, and the HDD2
LED flashing in turn with purple
lights. The Data transmission
completes when HDD1 LED shows
blue light and the HDD2 LED
goes out.
No transmission possible
5