Set Preset - EverFocus PowerVideo Plus User Manual

11.3

Set Preset

You can configure up to 192 preset positions in this field. Click the Set Preset tab, the
following panel appears.
Figure 11-6
1. Adjust the camera view to a desired position using the direction button. You can select
the pan / tilt speed from the PT Speed drop-down list for controlling the direction
buttons. Adjust zoom, focus and Iris if necessary.
2. To set up the current camera view as a preset position, select a page number and a
preset number from the Page and Preset No drop-down list for the current camera view.
3. Click Set to save the current position as the Preset Number you have selected.
4. Optionally set up a title, focus mode and white balance for this preset position view.
5. Follow Step 2 to 5 to set up another preset position. You can click the Next button to go
to the next page and then click the Preset No drop-down list to select a number. Or click
on the number in the Page field to select a preset number.
To activate the Preset function on the Live View window, click the PTZ Controls to display the
PTZ Control panel. Click the Preset button, click on the numeric buttons to select a preset
number and then click the Go button. The selected preset position should be displayed on
the camera view.
60
PowerVideo Plus