Activating The Dynamic E-Maps; Creating A Group - EverFocus PowerVideo Plus User Manual

7.1 Activating the Dynamic E-Maps

You have to configure the settings on the Web interfaces of the DVR / Mobile DVR / NVR or
IP cameras, and then configure the protocol and port settings for the Alarm Server on the
PowerVideo Plus. For details, please refer to 10.1 Activating the Alarm Function.

7.2 Creating a Group

You need to create a group before start using the dynamic E-Maps.
1. On the Main Screen, click the Dynamic E-Maps button, the E-Map window appears.
2. To create a group to include multiple E-Maps, click the Map Set tab and click New Map
Set. By default, the Map Set 1 group is created.
3. To create an E-Map in the Map Set 1 group, right-click on the Map Set 1 and then click
Add Google Map / Add JPEG Map, an E-Map (New Map 1) is created under the Map Set
1. You can repeat this step to create multiple E-Maps.
4. To rename the created E-Maps, right-click on the E-Map and select Rename.
5. To locate the E-Map image, drag and drop the E-Map image on the right-side of the
E-Map window. Or right-click on a created E-Map and click Load Image File.
6. To locate the cameras on the E-Map, drag and drop the cameras from the Device List
(No.10, Figure 2-2) to the created E-Map. You can change the direction of the camera
icon by right-clicking on the camera icon and click Rotate Right / Rotate Left.
Figure 7-2
31
PowerVideo Plus