EverFocus PowerVideo Plus User Manual page 37

PowerVideo Plus
To pop up an SOP panel:
The SOP panel is designed to inform the operators for what procedures to take when an
event occurs or an alarm is triggered.
1. Enable Automatically Display SOP Panel.
2. Click the SOP Config tab and select an alarm type from the Alarm Type drop-down list.
3. Type the procedures in the New Procedure field and click Add.
4. Click Save.
When an event occurs or an alarm is triggered, the following SOP Panel will pop up. You can
check the procedures to take and enter what actions you have done in the Actions Taken
field and then click the Enter Action button. You can also click the Previous Event or the Next
Event buttons to check the previous or next events.
Figure 7-5
33