Front Panel - Yamaha RX-Z9 Owner's Manual

F'/@=_T;f:_if'l=llq"
• FRONT terminals
Connect one or two speaker systems to these terminals. If
you use only one speaker system, connect it to either of
the FRONT A or B terminals.
The Canada model cannot output to two separate speaker systems
simultaneously.
Bi-wired connection
The unit also allows you to make bi-wired connections to
one speaker system. Use two pairs of speaker cables for
each speaker (one pair for the woofer and one pair tier the
tweeter/mid-range). To use the bi-wired connections, press
SPEAKERS A and SPEAKERS B on the front panel so
that both SPA and B light up on the front panel display.
Bi-wired connection
I
This unit I
6--.J I----.J
• CENTER terminals
Connect a center speaker to these terminals.
• SURROUND terminals
Connect a surround speaker system to these terminals.
• SUBWOOFER jacks
Connect one or two subwoofer(s) with built-in amplifier,
such as the YAMAHA Active Servo Processing
Subwoofer System, to the jack(s).
• SURROUND BACK terminals
Connect a surround back speaker system to these
terminals. If you only connect one surround back speaker,
connect it to the left (L) terminals.
• PRESENCE/ZONE 2 terminals
Connect presence speakers to these terminals. You can
also use these terminals for connecting Zone 2 speakers
(see page 101).
The presence speakers output ambient effects created by the DSP
sound fields. They do not output sound when other sound fields
are selected.
16