Controls And Functions - Yamaha RX-Z9 Owner's Manual

I[*.re]_Vllir,[o]JT,.'f,_T_Vlel._lhV[_'Jl[o]lY_
O LEARN
Used for setting up the manufacturer code or for
programming the functions of other remote controls (see
pages 88 and 89).
O MACRO
Used to program a series of operations for control by a
single button (see page 91).
@ MACRO ON/OFF
Turns the macro function on and off.
@ Input selector buttons
Selects the input source and changes the control area.
O MULTI CH IN
Selects the source connected to the MULTI CH INPUT
jacks. This source takes priority over the source selected
with INPUT SELECTOR (or the input selector buttons on
the remote control).
• Operation buttons
Operate various parameters and commands shown in the
on-screen display.
@ EXIT
Press to exit the on-screen display menus.
!_ TOP
Press to display the top level of the on-screen display
menus.
• Sound field program
Use to select sound field programs.
@
MUTE
Mutes the sound. The MUTE indicator turns on when the
MUTE function is on. Press again to restore the audio
output to the previous volume level.
• VOLUME +/-
Increasesor decreases the volume level.
O STRAIGHT/EFFECT
Switches the sound fields off or on. When STRAIGHT is
selected, input signals (2-channel or multi-channel) are
output directly from their respective speakers without
effect processing.
O SPEAKERS A/B
Turn on or off the set of front speakers connected to the A
and/or B terminals on the rear panel each time the
corresponding button is pressed.
O Cover
Slide down to use the concealed buttons for various setup
and parameter operations.
This section describes the controls and functions of the
GUI remote control. See 'USING THE GUI REMOTE
CONTROL"on page 31 for details.
SYSTEM
POWER STANDBY
MUTE
_YAMAHA
--0
O SYSTEM POWER
Turns on this unit's power.
• Multi-control/ENTER
Tilt up/down or left/right to navigate through the various
parameters and commands shown in the on-screen display.
Press to choose the selected item in the on-screen display.
• TOP
Press to display the top level of the on-screen display
menus.
0 EXIT
Press to exit the on-screen display menus.
• STANDBY
Sets this unit in the standby mode.
• VOLUME +/-
Increasesor decreases the volume level.
0 MUTE
Mutes the sound. The MUTE indicator turns on when the
MUTE function is on. Press again to restore the audio
output to the previous volume level.
8