ADJUSTMENTS
Confirming the Optimum H BLK L, H BLK R Values
Optimum H BLK R value
OSD display
Movement on screen
B
A
When point A is lowered by point convergence, point B should not move.
Confirming the Optimum H BLK L Value
C
D
When point C is lowered by point convergence, point D should not move.
Note
Convergence can be adjusted even if the optimum values are slightly different from the above optimum values during adjust-
ments.
But, if the screen changes markedly, re-adjust H BLK L or H BLK R, and adjust the convergence.
88