Weider PRO 270 L User Manual page 7

2. 2
Attach one end of the Crossbar (2) to two Joint
Plates (35, 41) with two M10 x 68mm Bolts (27)
and two M10 Locknuts (31). Do not tighten the
Locknuts yet.
Attach the other end of the Crossbar (2) in
the same way.
27
2
0
0
o
.
Orient the Base (33) so that the warning decals
are in the positions shown.
Attach the Base (33) to the Front Leg (4) with
two M10 x 35mm Carriage Bolts (37) and two
M10 Locknuts (31).
4-
<
37
31
Warning
, Decals
.
Attach the Front Leg (4) to the Frame (3) with
two M8 x 45mm Bolts (28), two M8 Washers
(39), and two M8 Locknuts (38). Make sure that
the Locknuts are in the indicated hexagonal
holes; do not tighten the Bolts yet.
28_39
onal
Holes
7