7.
7
Orientthe Backrest(7)as shown.Attach the
Backrest tothe Backrest Frame (5)withfourM6x
t 6ramBolts(24).
Attach theSeat(8)tothe Frame (1)withfourM6
x 60mmBolts(17)andfour M6Washers ( 22).
Make
sure that all parts are properly tightened
before you use the weight
bench.
24
5"
17
ADJUSTMENT
ADJUSTING THE BACKREST
The Backrest (7) can be used in a declined position,
a level position, or any of four inclined positions. To
adjust the Backrest, first remove the Locking Pin (21)
from the Frame (1). Move the Backrest to the desired
position, and reinsert the Locking Pin into the Frame
and an adjustment hole in the Pivot Bracket (6).
WARNING:
Makesore that t he
Locking Pin (21) is fully inserted through
the
Frame (!)and
the Pivot Bracket (6),
Adj
Holes
8