Replacing Fuse - Troy-Bilt 836 series Operator's Manual

Replacing Fuse "_
The electricstartercircuit and batteryare protectedby a
40 amperefuse,If the fuse burnsout, theelectricstarter
will not operate,If the unitfails to startwith the electric
starter,performthe followingstepsto checkthe fuse
insidethe batteryhousing:
1. Open the batterycover as describedin Replacing
Battery, see Figure5-3.
2. Removefuse from socketand inspectasshown in _-
Figure5-6. If it is burnedout, replacewith standard
automotive40 amperefuse.
3. Carefullyplacewiringback into housing,close battery
cover,and fold upper handleback intoplace.
NOTE: The engine can be started manually if the fuse
burns out.
Off-Season
Storage
The followingstepsshouldbe taken to prepareyourlawn
mowerfor storage.
Cleanand lubricatemowerthoroughlyas describedin
the lubricationinstructions.
We do not recommendthe useof a pressurewasher
or gardenhoseto dean your unit.
Referto enginemanualfor correctenginestorage
instructions.
Coat mower'scuttingbladewith chassisgreaseto
preventrusting.
. Storemowerin a dry, clean area.Do notstore next to
corrosivematerials,such as fertilizer.
Whenstoringany type of powerequipmentin a poorly
ventilatedor metalstorageshed,careshould betaken to
rust-proofthe equipment.Usinga light oil or silicone,coat
the equipment,especiallycables andall movingparts of
your lawnmowerbeforestorage.
Battery
The batterymustbe storedwith a full charge.Extended
storageof a dischargedbatterywill reducelifeand
capacityof the battery.
J
Figure 5-6:Whenreplacing f use,usea standard automotive
7_f2 a mpfuse.
The engine can be
started manuaity ifthe
fuse burns out,
\
13