Storing Channels In Memory (Optional) - Toshiba 42L6200U User Manual

6 Setting upyourTV
How to navigate the menu
3 Press the (_1 _ arrow) buttons to select Home.
4 Press the OK button.
ANT/CABLE In
This setting configures the antenna input source for the
ANT/CABLE terminal.
1 Press the MENU button.
2 Select SETTINGS, SETUP. and then ANT/CABLE In.
3 Select Antenna or Cable and press Next.
4 Select Cable and press Next.
NOTE If youdo notwantto scanchannels, youdo notneed to make a
selection for ANT/CABLE. SelectNexl andpressOKto skipthis
step.
5 Select Start Scan.
After scanning is complete, the auto tuning results screen will
appear.
6 Press OK or EXIT.
Storingchannels i n memory (optional)
To make sure your TV stops only on the channels you want when
you press the CH Up/Down arrow buttons on the remote control or
the control panel, store those channels in the TV's memory.
Auto Tuning
NOTE Youmustset uptheantenna/cable i nputsource first. See"Initial
setup"on page51.
You can set up the TV to detect all active channels in your area and
store them in its memory. Then you can manually store or skip
individual channels from memory.
Option. Description."
Note:If youselectCable, a utotuningdeletes previously stored
channels from memory.
Cable
Thissetuprequires sometime,butyou do notneedto repeat t he
setupunlessyourcableTVservice's lineupchanges significantly.