4
InitialSetup andMenu
Initial setup
While scanning is in progress, the Auto Tuning Progress Screen
appears.
(Sample Illustration) Auto Tuning Progress Screen
After scanning is complete, the auto tuning results screen (such as
the one below) will appear.
Press OK or EXIT.
(Sample
Illustration)
Auto Tuning Results screen
NOTE
Althoughtheymaybedisplayed in theabovelist, encrypted
channels cannotbe viewed.
If some channels are not found after scanning:
o**oCheck the antenna/cable connections, and scan again.
o**oConnect the TV to the antenna or cable box directly and scan
again.
1
Press the MENU button. Select SETTINGS,
SETUR
Quick Setup, and then press OK.
A confirmation message appears.
2
Press the (4/_
arrow) buttons to select Yes. Press OK.
3
Repeat setup to Step 6.
o**oIf you selected Antenna previously, select Cable.
o**oIf you selected Cable previously, select Antenna.