Amplifier Volume And Mute Controls; Other Regza-Link Functions; Regza-Link Pc Link - Toshiba 55UX600U Owner's Manual

AmplifierVOLUME and MUTE
controls
With your TV's remote control, you can adjust or mute
the sound volume of your amplifier. First, set the
MODE SELECT switch to IV.
• _ _ adjust the volume level.
. _u_turns off the sound.
To use this function:
1
From the PREFERENCES menu, highlight
REGZA-LINK Setup and press _.
2 Press • o1"• to highlight Speaker Preference.
3 Press < o1"• to select Amplifier.
Note: Confirm that a connected REGZA-LINK ® device
(such as DVD player, etc.) is selected for the Ampfifier
input source.
Note:
• You can also use this function when the amplifier is
connected to the TV's DIGITAL AUDIO OUT terminal
(not HDMI connection). In this case, select a digital
audio input mode on the amplifier.
° These functions depend on the device connected.
Other REGZA-LINK ® functions
When Enable REGZA-LINK and each item in the
REGZA-LINK Setup menu are set to On, the following
functions will be enabled.
TV Auto If a REGZA-LINK ®device is turned on,
Power the TV turns on automatically.
If the TV is turned off, the TV will send a
Auto Standby message to turn off all of the REGZA-
LINK devices connected to the TV.
If Amplifier Control is set to On, you can
Amplifier adjust the sound volume or turn off the
Control
sound using the remote control.
Speaker
Preference
From this item, you can set your audio
output preference to the TV speakers or
the amplifier. When this item is set to
Amplifier, the remote control can be used
to adjust or mute the volume of the
audio. This item will be grayed out and
set to TV Speakers automatically unless
a REGZA-LINK ('_compatible audio
receiver is corulected.
Note: When you turn on the amplifier, change its input
source, or adjust the sound volume, the sound will be
output from the amplifier's speakers even if "IV Speakers
has been selected. Turn the TV off and on again to output
the sound from the TV speakers.
To set the REGZA-LINK ® Setup:
1
From the PREFERENCES menu, highlight
REGZA-LINK Setup and press _.
2
Press • or • to highlight Enable REGZA-LINK
3 Press < or • to select On.
4
Note: If you setEnable REGZA-LINK to Off, the other
items under REGZA-LINK Setup will be grayed out.
Press • or • to highlight the REGZA-LINK setup
item you want to use, and press < or • to select On
or the desired mode.
• TV Auto Power: On/Off
° Auto Standby: On/Off
• Amplifier Control: On/Off
• Speaker Preference: TV Speakers/Amplifier
REGZA-LINK ® PC Link
This feature automatically sets suitable widescreen
formats and picture preferences when the TV is
connected to a REGZA-LINK ® PC.
Note: This feature depends on the type of equipment
connected.
48