The Time Display – analogue only
The time display facility allows the current (text service)
time to be seen on the television screen.
D
Press
whilst watching a normal television
broadcast to see the time display from the broadcaster. It
will remain on screen for about 5 seconds.
NOTE: This display may not be available in some cases.
Stereo and Bilingual transmissions
For DTV programmes
For stereo or dual mono broadcasts, press
C
/
c
to select settings.
Mode Display
Stereo
Stereo
Dual mono
Dual 1
Mono
Multichannel
For multi-audio track broadcasts, press
change the audio language (see "Audio languages" on page
75).
For ATV programmes
If stereo or dual language broadcasts are transmitted, the
word Stereo or Dual will appear on the screen each time
channels are changed, disappearing after a few seconds.
If the broadcast is not in stereo, the word Mono will
appear.
s
Stereo... Press
to select Stereo or Mono.
Bilingual... Bilingual transmissions are rare. If they are
transmitted, the word Dual will be displayed. Choose the
required programme number, and if the word Dual
s
appears, press
to select Dual 1, Dual 2 or Mono.
s
and use
Pressing
c
S
S
Left
Right
S
Dual 2
–
–
s
repeatedly to
31
Sound controls
Volume controls and sound mute
Volume
2
2
Press
+ or
– to adjust the volume.
Sound Mute
Press
once to turn the sound off and again to cancel.
Sound Navi
To set the frequency characteristics in the equaliser
function corresponding to the environment.
a
B
Press
and
b
c
B
b
Press
and
/
Stand or Wall.
Sound Mode
This feature adjusts the Advanced Sound Setting
depend on the content.
a
In the Sound menu, press
c
Mode and press
Music, Movie, Clear Voice or Sound Separation
and press OK.
Graphic Equaliser
This feature adjusts the frequency of output. This feature
is effective only the selection of Standard in Sound
Mode.
a
In the Advanced Sound Settings menu, press
B
b
/
to select Graphic Equaliser and press OK.
Graphic Equaliser screen will be displayed. Press
C
/
c
to select frequency and press
select level. To close the window, press EXIT.
TruDialog™
Dialog enhancement for clear and intelligible vocals.
a
In the Advanced Sound Settings menu, press
B
/
b
to select TruDialog and press
to select On or Off.
CONTROLS AND FEATURES
b
/
to highlight Sound icon.
to select Sound Navi to select
B
/
b
to select Sound
B
b
and
/
to select Standard,
B
/
b
to
c
and
B
/
b