Using The Remote Control To Operate A Cable Converter Box, Satellite Receiver, Vcr, Dvd Player, Or Htib (Home Theater In A Box) - Toshiba TheaterWide 27HL85 Owner's Manual

Using the remote control to operate a cable
converter box, satellite receiver, VCR, DVD
player, or HTIB (home theater in a box)
If you have a non-Toshiba device or a Toshiba device that the remote
control is not preprogrammed to operate, you must first program the
remote control to recognize the device (if you have not already done
so). See pages 17 and 18.
To use your TV remote control to operate a:
• Cable converter box or satellite receiver, set the Device Switch to
CBL/SAT.
• VCR, set the Device Switch to VCR.
• DVD player or HTIB, set the Device Switch to DVD.
Point the remote control
directly at the device.
Note:
Even after tt_e TV remote control is
programmed, it may not operate certain
features on your other device, ff this happens
and you wish to use those features, you will
need to use the device's original remote
control
POWER
Turns the selected device on and off.
+10
Press to directly access
DVD chapters higher than 10.
I ,.,o
Displays TV status information on-
screen.
Channel Numbers (0-9)
Press to directly access charmels (as
opposed to CH • •).
DVD MENU
Accesses DVD menus.
GUIDE
Displays channel guide.
Accesses a DVD's top menu.
Required by some VCRs and cable
converter boxes to change the channel.
Device Switch
Set to "TV" to control the TV; "CBUSAT" to
control a cable converter box or satellite
receiver; "VCR" to control a VCR; "DVD" to
control a DVD player or HTIB.
Press during play or record mode to
pause the picture; press again to restart.
To view one program while recording
another, press to select TV mode.
Rewindsthe tape or DVD. (Press duringplay mode
to view the picturemoving rapidlybackward.)
Starts tape recording.
FI
Fast-forwards the tape or DVD.
(Press during play mode to view the
picture moving rapidly forward.)
• • <1=.
Press to navigate DVD menus (may not
work on some DVD players).
CLEAR
Press to reset the title and chapter
number.
CH••
• selects the next higher channel;
• selects the next lower channel.
(for channels programmed into
memory only)
PLAY
Begins playback of a tape or DVD.
STO P
Stops the tape or DVD.
SKIP/SEARCH
Skips forward to locate later DVD
chapters.
SKIP/SEARCH I<1<1
Skips back to beginning of current DVD
chapter or locates previous chapters.
19