Connecting A Dvd Player With Colorstream (Component Video) And A Vcr - Toshiba TheaterWide 27HL85 Owner's Manual

Connecting a DVD player with ColorStream
(component video) and a VCR
This connection allows you to watch DVD, VCR, and TV programs,
and record TV programs.
Your TV has ColorStream c_(component video) inputs. Connecting
your TV to a DVD player with component video (such as a Toshiba
DVD player with ColorStream _) can greatly enhance picture quality
and realism.
- To record one TV program while watching another TV program,
tune the VCR to the channel to record, and tune the TV to the
channel to watch.
- To record a TV program while watching a DVD, tune the VCR to
the channel to record, and select ColorStream HD on the TV (see
"Selecting the video input source" on page 44).
You will need:
• two coaxial cables
• one set of standard A/V cables
• one pair of standard audio cables
• one set of component video cables
From
Antenna
Stereo VCR
VIDEO AUDIO
L R
@
3
TV upper back panel
Note:
For the twbest possible picture qualit34,use
component video cables (or an HDMI or DV!
cable) between the TVand DVD player:
For HDM! or DV! connection, see page 15.
The ColorStr_am HD input and the HDM!
input can be used with Progressive (480p,
720p) and lnterlaced (480i, 1080i) scan
systems, however, a 1080i s/:gnal will pmvide
the best picture performance.
ff your DVD player is not compatible with
component video, HDMI, or DV!, use the
S-video connections (plus the standard audio
connections) instead (see page 11).
The unauthorized recording, use,
distribution, or revisionof television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
DVD player with component video
12