Operating The Tv; Operating With The Buttons On The Tv Set; Operating With Remote Control - Hitachi 32LD8700TU Instructions For Use Manual

PROGRAM
01 ITV
02 ZDF
03 CH5
04 C - 02
05 C - 05
06 C - 06
07 C - 08
08 C - 21
09 C - 23
10 C - 35
If you do not accept the locations and / or the
programme names, you can change them in
Programming menu. For details see Program
menu on page 26.
To display channel list in IDTV, switch to the
IDTV via pressing "DTT/TV" button. Then
" button to enter main menu, Chan-
press "
nel List will be highlighted press "OK" button
to enter the menu. For detailed information
see page 13.

Operating The TV

You can operate your TV using both the re-
mote control handset and the buttons on the
set.
Operating with the buttons on the
TV set
Volume setting and programme selection
can be made by using the buttons on the
control panel at the right side of the TV.
Volume Setting
Press the "- " button to decrease volume
or the " +" button to increase volume, A
volume level scale (slider) will be displayed
at the bottom of the screen.
Programme Selecting
Press the "P/CH+" button to select the next
programme or the "-P/CH" button to select
the previous programme.
11 C - 43
12 C - 64
13 C - 68
14 S - 40
15 - - - - -
16 - - - - -
17 - - - - -
18 - - - - -
19 - - - - -
20 - - - - -
Name Insert
Delete APS
Entering The Menu
Press the "MENU" button on the control
panel at the side of the TV to enter the menu.
"-P/CH / P/CH+" and "
on the TV are used as navigation buttons in
menu.
AV Mode
Press the "TV/AV" button on the control
panel at the side of the TV to switch your TV
to AV modes.

Operating With Remote Control

The remote control handset of your TV is de-
signed to control all the functions of your TV.
The functions will be described in accor-
dance with the menu system of your TV.
Functions of the menu system are described
in Menu System section.
Volume Setting
Press the
Press the button to decrease volume. A
volume level scale (slider) will be displayed
at the bottom of the screen.
Programme Selecting
(Previous or next programme)
• Press the "P-" button to select the previous
programme.
• Press the "P+" button to select the next
programme.
Programme Selecting (direct access):
Press digit buttons on the remote control
handset to select programmes between 0
and 9. The TV will switch to the selected
programme after a short delay.
• For a two digit programme number enter the
second digit after pressing the first digit within
2 seconds.
- 10 -
+ / -
button to increase volume.
" buttons