Operation; Attachments; Using Controls - Snapper SLT23460AWS SERIES 0 Safety Instructions & Operator's Manual

Operation
Attachments
This unit can use many different attachments.
For all pull-behind attachments or trailers, the maximum
gross weight is 250 pounds. Gross weight is the weight of
the attachment or trailer and any load that might be on or in
it.
Do not operate on a slope that is greater than 10 degrees
when using a pull-behind attachment or trailer. We have
included a slope guide in this book to help you determine the
slope on which you will be operating your unit. Never allow
someone to stand or ride on or in an attachment or trailer.
Using Controls
How to Use the Throttle Control
Usethe throttle control to increase or decrease the speed of
the engine.
CAUTION:Always operate the engine with the throttle control
in the FASTposition. If the engine runs for several minutes
at slower than the FASTposition, the engine and
transmission will overheat and can be damaged.
1. The FASTposition is marked with a detent. For normal
operation and when using a grass bagger, move the
throttle control to the FAST position. For maximum
charging of the battery and for a cooler running engine
and transmission, operate the engine in the FAST
position.
2. For transport and to tow pull behind attachments,
control the ground speedwith the speed control pedal.
3. The engine governor is set at the factory for maximum
performance. Do not adjust the governor to increase
the speed of the engine.
[::
,n
14 www.snapper.com