Table of Contents
Advertisement
4
Electric Stove Set Up
CAUTION
Sharp Edges
•
Wear protective gloves and safety glasses
during installation.
A. Leg Leveling System
•
Thread allen bolts through nuts until flush. See
Figure 4.1
•
Slide assembled nuts and bolts into the slot on the legs
with the nuts on the bottom. Use a 5/32 in. (3.96 mm)
Allen wrench to adjust legs to the desired level. See
Figure 4.2.
Note: Two allen bolts and two nuts are included in the
component bag.
Figure 4.1
Leveling Legs Components
Figure 4.2
Assembled Leveling Legs
B. Plug into Outlet
Heat & Glo • TiaraE• 4035-822 Rev F • 01/05
WARNING
Shock Risk
Improperly grounded outlets could cause
electrical shock.
•
Always use properly grounded, fused and
polarized outlets.
•
Always use ground fault protection where
required by electrical code.
7
Advertisement
Table of Contents
