Table of Contents
Related Manuals for Hayter Motif 432D
Summary of Contents for Hayter Motif 432D
- Page 1 Motif CODES 432D 433D 434D 435D (Push) (Push) (Auto Drive) (Auto Drive) OWNER'S HANDBOOK (English Version) PART NUMBER: 111-0448 (A) CODE FROM SERIAL NO: 432D 260000001 433D 260000001 434D 260000001 435D 260000001 ISSUE 11.11.05...
-
Page 2: Specifications
MAIN FEATURES / SPECIFICATIONS Main Features Spark Plug Lead Fuel Filler Cap. Oil Filler Cap and Dipstick. Handlebar Securing Knob. Rope Guide. Engine Start-Grip. Engine Stop lever. Handlebar. Ground Drive Clutch Lever (Auto drive only). 10. Rear Deflector. 11. Grassbag Assembly. 12. - Page 3 1ST Year (12 months) 1ST Year (12 months) Owner’s Name: We certify that this service has been carried out by an Authorised Hayter Serial Number: Service Dealer Date: Date: Note for dealer: Please retain this voucher for your records. 2nd Year (24 months) 2nd Year (24 months) Owner’s Name: We certify that this service has been...
-
Page 5: Table Of Contents
CONTENTS 1.2 Main Features/Specifications 1.20 Maintenance Schedule 1.20 - Daily 1.5 Contents 1.20 - 25 Hrs or Every Season 1.20 - 50 Hrs or Every Season 1.6 Introduction 1.20 - 100 Hrs or Every Season 1.7 Warranty 1.21 - 1.27 Mower Maintenance 1.21 - Engine 1.8 - 1.10 Safety Precautions... -
Page 6: Introduction
Any arbitrary modifications carried out to this machine may relieve Hayter Limited of liability for any resulting damage or injury. Hayter mowers are robustly constructed and designed for efficient economical performance under normal mowing conditions. Correct operation and maintenance will ensure a long and satisfactory service life. -
Page 7: Warranty
WARRANTY LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of major proprietry components ie. engines, gearbox / transaxle (where applicable) furnish their own warranty and services are provided through their authorised network. -
Page 8: 1.10 Safety Precautions
SAFETY PRECAUTIONS Safety Alert Symbol This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury. Carefully read the following and inform others. Your mower is perfectly safe if used correctly. Failure to observe the following precautions may result in serious injury. -
Page 9: Operation
SAFETY PRECAUTIONS Preparation - Always use fresh fuel. Stale fuel can block the carburettor and cause leakage. - Replace fuel tank and oil tank caps securely. A damaged cutterblade or loose fixing bolt are major hazards. Before use, always visually inspect the cutting mechanism to ensure that it is in good condition. - Page 10 SAFETY PRECAUTIONS Operation Do not tilt the mower when starting the engine. Do not put hands or feet near or under rotating parts. Never pick up or carry the mower while the engine is running. Never lift the rear deflector while the engine is running. Never touch the exhaust/exhaust guard or cooling fins when the engine is hot.
-
Page 11: Safety Symbols
SAFETY PRECAUTIONS Maintenance & Storage Check the rear deflector and grassbag frequently for wear or deterioration. Replace worn or damaged parts for safety. If the fuel tank has to be drained, this should be done outdoors and when the engine is cool. Wear strong work gloves when removing and reassembling the cutterblade. -
Page 12: Assembling The Mower
ASSEMBLING THE MOWER Delivery Checklist Remove the mower from the packaging and check that the following items have been supplied correctly. If any items are missing contact, your local Hayter dealer. 1. Engine Handbook. 2. Grassbag 1C432A01 To prevent accidents cut off the long ribbon attached to the grass- bag and discard. -
Page 13: Before Starting The Mower
MOWER BEFORE STARTING Prevent Engine Damage To prevent engine damage the engine is shipped without oil or petrol. The engine must be filled with the correct grade of oil and petrol before starting the engine. Oil Type Always use high quality detergent oil classified SAE 10W 30 Oil. Never use additives with this oil. -
Page 14: 1.17 Operating The Mower
OPERATING THE MOWER Controls Operate all control levers several times and ensure that the cables move freely. Check that the engine stop and (ground drive clutch levers - Autodrive models) return freely to their rest position when released. Starting - Step 1 Turn the fuel valve to the on position. -
Page 15: Turning
OPERATING MOWER Turning To make a wide turn steer the mower with the handlebar in the direc- tion required. To make a tight turn (release the ground drive clutch lever, Autodrive model), apply downward pressure on the handlebar to raise the front wheels just above ground level and steer in the required direction. -
Page 16: Before Mowing
OPERATING THE MOWER Before Mowing To prevent accidents thoroughly inspect the area and remove all objects which when contacted by the cutterblade could become dangerous projectiles. Inspect the area for hidden obstructions which when contacted by the cutterblade could risk health and safety or result in damage to the mower. -
Page 17: Non-Grassed Areas
OPERATING THE MOWER Non-Grassed Areas When moving the mower across non-grassed areas, stop the engine by releasing the engine stop lever and set the mower to the maximum height of cut to protect the cutting mechanism. 1.17... -
Page 18: Lawn Care Calendar
LAWN CARE CALENDAR To be used as a guide only. January There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. February Rake the grass thoroughly. Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary. -
Page 19: Lawn Care
LAWN CARE CALENDAR August Keep mowing regularly and watering as necessary. Fill any cracks caused by drought with a mixture of sharp sand and soil. In dry weath- er conditions leave the grass longer to help retain ground moisture. September Raise the height of cut to allow the grass to thicken and protect the roots from the winter frost and snow. -
Page 20: 100Hrs Or Every Season
MAINTENANCE SCHEDULE Follow the hourly or calendar intervals, whichever occurs first. More frequent service will be required if working for prolonged periods under dusty, dry conditions, or when airborne debris is present or after extensive operation cutting tall, dry grass. After the very first five hours change the engine oil Daily Check the oil level... -
Page 21: 1.27 Mower Maintenance - Engine
MOWER MAINTENANCE To prevent accidents stop the engine disconnect the spark plug lead before attempting to carry out maintenance procedures on the mower. Engine Finger Guard Carburettor Spark Plug / Lead Exhaust Guard Exhaust Oil filler Cap/ Dipstick Start Grip Fuel Cap Air cleaner. -
Page 22: Oil Service
MAINTENANCE MOWER Oil Service Check the oil level daily before starting the engine and ensure that the correct oil level is maintained. Refer to-‘Before Starting the Mower’ for oil checking and filling instructions. Change the engine oil after the first 5 hours of operation and thereafter according to the ‘Maintenance Schedule’:- 1. -
Page 23: Spark Plug Service
MOWER MAINTENANCE Spark Plug Service Use only an approved spark tester (1) to check for a spark as shown in the diagram. Replace the spark plug every 100 hours or every season, whichever occurs first. A spark plug wrench is available from any authorised Honda service dealer. -
Page 24: Deck Housing
MOWER MAINTENANCE Deck Housing Remove grass debris from the top and underside of the deck housing immediately after use. Fertilisers and top dressings are particularly corrosive. Thoroughly clean the mower deck immediately after use on treat- ed grass and store well away from corrosive materials. Securing Nuts &... -
Page 25: Lubrication
MOWER MAINTENANCE Lubrication Lubricate the wheels, pivot points and linkages with engine oil every 25 operating hours. Apply a good quality medium grease to the inner control cables at the point of entry and exit from their outer casing. Cutterblade Removal Drain the fuel by running the engine until the fuel tank is empty and the engine stops. -
Page 26: Cutterblade Assembly
MOWER MAINTENANCE Cutterblade Assembly Assemble the cutterblade (1) with the turned up edges facing towards the engine. Secure the cutterblade using the friction washer (2) and new fixing bolt (3) and tighten to a torque of 54Nm. To prevent accidents never reuse the original fixing bolt. Cutterblade Sharpening A slightly worn cutterblade may be re-sharpened. -
Page 27: Storage
MOWER MAINTENANCE Storage To store the handlebar unscrew the 2 small securing knobs sufficient- ly to allow it to pivot forwards to rest against the mower. Take care to ensure that the control cables do not become snagged at the pivot point and depress the engine stop lever to prevent it being damaged through contact with the engine. -
Page 28: 1.29 Trouble Shooting
TROUBLE SHOOTING PROBLEM POSSIBLE FAULT REMEDY Engine will not turn over Incorrect oil level. Check oil level. Obstruction under deck. Remove obstruction. Engine smokes Excess oil level. Check oil level. Air cleaner cartridge oil Service air cleaner. soaked or blocked. Engine runs then stops Fuel starvation. - Page 29 TROUBLE SHOOTING PROBLEM POSSIBLE FAULT REMEDY Engine vibrates excessively Mounting bolts loose. Tighten bolts Cutterblade bolt loose. Tighten bolt Cutterblade out of balance. Balance cutterblade Bent crankshaft. Consult your dealer Uneven cut Undulating ground conditions Change direction of travel Cutterblade worn Sharpen the cutterblade Cutterblade out of balance Balance the cutterblade...
-
Page 30: Parts List
PARTS LIST EC DECLARATION OF CONFORMITY Manufacturer: HAYTER LIMITED, Address: Spellbrook, Bishop’s Stortford, Herts. CM23 4BU. ENGLAND declare that the lawnmower: Model name: Motif 41 Motif 48 Motif 48 Motif 53 Push Push Autodrive Autodrive Type: Pedestrian rotary Pedestrian rotary Pedestrian rotary Pedestrian rotary Model No:... -
Page 31: 1.32 Parts List
PARTS LIST NO. DESCRIPTION PART NO. ITEM NOTE 434 435 Washer - 12mm Thin HY09485 Engine - HY432004 Engine 435004 Decal - Engine HY432009 Decal - Engine 433009 Decal - Engine 435009 Cable Engine Brake HY412007 Control Throttle HY432006 Knob - Handlebar 480088 Plug - Handlebar 300160... - Page 32 PARTS LIST NO. DESCRIPTION PART NO. ITEM NOTE 434 435 Bracket - Handlebar RH 432023W Bracket - Handlebar RH 433018W Bracket - Handlebar RH 435018W Nut - Rivet 100.004.493 1662 Clip - Belt Cover 100.000.801 Cover - Belt 100.000.800 Cover - Belt 100.024.883 Knob - HOC 100.000.828...
- Page 33 PARTS LIST NO. DESCRIPTION PART NO. ITEM NOTE 434 435 Axle Support 100.000.895 Decal - Hayter 410087 Trim - Rear Wheel 200mm 100.033.711 Cable - Clutch A/D 434002 Belt Drive 100.004.594 Belt Drive 100.014.919 Spring - Tension Gearbox 100.000.819 Gearbox 48 100.004.615 Gearbox 53 100.004.816...
- Page 34 PARTS LIST 1.34...
- Page 35 NOTES Notes:- 1.35...
-
Page 36: Customer Information/Notes
CUSTOMER INFORMATION Serial No: Engine Type:- GVC135EA2G7 (432/433/434) GVC160EA2G7 (435) Engine:- Honda GVC 135 (432/433/434) 160 (435) Date of Sale:- Your Local Dealer:- 1.36...