Download
Share
Print this page
Snapper 580.752660 Operator's Manual
  1. Manuals
  2. Brands
  3. Snapper Manuals
  4. Pressure Washer
  5. 580.752660
  6. Operator's manual

Snapper 580.752660 Operator's Manual

3100 psi max 2.5 gpm max
Hide thumbs

Advertisement

Available languages

Available languages

Quick Links

Download this manual
Operator's Manual
3100 PSI MAX
2.5 GPM MAX
PRESSURE WASHER
Model No. 580.752660
®
HOURS: IVlon.- Fri. 8 a.m. to 5 p.m. (CT)
WARNING
Before using this product, read this
manual and follow all Safety Rules
and Operating Instructions.
ADVERTENCIA
Antes de utilizar el producto, lea este
manual y siga todas las Reglas de
Seguridad e Instrucciones de Uso.
• Safety
• Assembly
• Operation
• Maintenance
• Parts
• Espafiol,p. 32
This pressure washer is rated in accordance to the Pressure Washer Manufacturers Association
(PWMA) standard PW101 (Testing and Rating Performance of Pressure Washers).
Esta iimpiadora a presi6n est_ ciasificada conforme a la norma PW101 (comprobaci6n y ciasificaci6n de rendimiento de limpiadoras
a presi6n) de la Asociaci6n de fabricantes de bombas a presi6n (Pressure Washer Manufacture's Association, PWMA).
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
visit our website: www.sears.com
Part No. 208992GS Draft B (01/30/2009)

Advertisement

loading

Related Manuals for Snapper 580.752660

Summary of Contents for Snapper 580.752660

  • Page 1 Operator's Manual ® 3100 PSI MAX 2.5 GPM MAX PRESSURE WASHER Model No. 580.752660 • Safety • Assembly HOURS: IVlon.- Fri. 8 a.m. to 5 p.m. (CT) • Operation • Maintenance WARNING ADVERTENCIA • Parts Before using this product, read this...
  • Page 2 SNAPPERTW0-YEAR LIMITED WARRANTY For the first year from the date of purchase, if this Snapper product fails due to a defect in material or workmanship, return it to any Sears store or Parts & Repair Center in the United States for free repair.
  • Page 3 Read this manual carefully and becomefamiliar _i, WARNING The engine exhaust from this product with your pressurewasher. Knowits applications, contains chemicals known to the State of California to its limitations, and any hazards involved. cause cancer, birth defects, or other reproductive harm. Important Safety Information _i, WARNING This product contains lead and lead...
  • Page 4 _k WARNING Starter cord kickback (rapid retraction) can _k WARNING Fuel and its vapors are extremely flammable and explosive. result in bodily injury. Kickback will pull hand and ,_arm toward engine faster than you can let go. Fire or explosion can cause severe burns or death.
  • Page 5 A WARNING Risk of eye injury. _i, WARNING Use of pressure washer can create Spray can splash back or propel objects. Kickback from spray gun can cause you puddles and slippery surfaces. to fall. • Always wear indirect vented (chemical splash) safety goggles •...
  • Page 6 KNOW YOURPRESSURE W ASHER Read the Operator'sManual and safety rules before operatingyour pressure washer. Comparethe illustrations with your pressure washer to familiarize yourself with the locations of various controls and adjustments. Savethis manual for future reference. A - Spray Gun-- Controls the application of water onto L - Oil Drain -- Drain engine oil here.
  • Page 7 6 If any parts are missing or damaged, call the pressure washer helpline at 1-800-317-7833 ASSEMBLING PRESSURE WASHER Your Snapper pressure washer will need assembly before operation: Insert "L" bolt (J) through hole on left side of handle (viewing from front of unit). Hold bolt in place and attach Fill out and send in registration card.

  • Page 8: Warranty

    Add Fuel Insert spray gun holder wireform (A) through hole just above cleaning tank on right side of handle (viewing Fuel must meet these requirements: from front of unit). Hold wireform in place and attach a • Clean,fresh, unleaded gasoline. plastic knob (B) from inside of unit.
  • Page 9 CAUTION! Alcohol-blended fuels (called gasohol, ethanol or Connect Hose and Water Supply to Pump methanol) can attract moisture, which leads to separation and formation of acids during storage. Acidic gas can damagethe NOTICE DO NOT run the pump without the water supply fuel system of an engine while in storage.

  • Page 10: Safety Rules

    Before connecting garden hose to water inlet, inspect _i, WARNING Risk of eye injury. inlet screen. Cleanscreen (A) if it contains debris or have Spray can splash back or propel objects. it replacedif damaged. DO NOTrun pressure washer if inlet screen is damagedor missing. •...
  • Page 11 HOWTO USEYOUR PRESSURE WASHER To Start Your Pressure Washer To start your engine-powered pressure washer for the first If you have any problems operating your pressure washer, time, follow these instructions step-by-step. This information please call the pressure washer helpline at 1-800-317-7833. also applies whenever you start the engine after you have let Pressure Washer Location the pressure washer sit idle for at least a day.
  • Page 12 IMPORTANT:Beforestarting the pressure washer, be sure 11. When engine starts, slowly move choke lever to "Run" 'ou are wearing safety goggles as described below. position, as engine warms. If engine falters, move choke lever to "Choke" position, then to "Run" position. _i, WARNING Risk of eye injury.
  • Page 13 How to Stop Your Pressure Washer Cleaning and Applying Detergent Releasespray gun trigger and let engine idle for two _i, CAUTION Chemicals can cause bodily injury, and/or minutes. property damage. Move throttle to SLOW position, then STOPposition. • NEVERuse caustic liquid with pressure washer. •...
  • Page 14 8A.If using cleaning tank, r otate detergent shut-off valve on Keep spray gun a safe distance from spray surface. cleaning tank to"On" p osition ( A). _k WARNING Kickback from spray gun can cause you to fall. • Operate pressure washer from a stable surface. •...
  • Page 15 ENGINETECHNICALINFORMATION PRODUCTSPECIFICATIONS This is a single cylinder, overhead valve (OHV), air cooled Pressure Washer Specifications engine. It is a low emissions engine. Max Outlet Pressure ....... 3,100 PSI In the State of California, Model 120000 engines are certified Max Flow Rate......2.5 GPM by the California Air Resources Board to meet emissions Detergent Mix ......

  • Page 16: Assembly

    OWNER'S RESPONSIBILITIES Pump Oil DONOT attempt any oil maintenanceon this pump. The Follow the hourly or calendar intervals, whichever occurs pump is pre-lubricated and sealed from the factory, requiring first. More frequent service is required when operating in adverse conditions noted below. no additional maintenance for the life of the pump.
  • Page 17 Disconnect PrecisionSpray Selector from spray gun. Check High Pressure Hose Use a small paper clip to free any foreign material High pressure hoses can develop leaks from wear, kinking, or abuse. Inspect hose before each use. Checkfor cuts, clogging or restricting the high pressure nozzles (A). leaks, abrasions, bulging of cover, or damageor movement of couplings.

  • Page 18: Operation

    ENGINEMAINTENANCE Adding Engine Oil Make sure pressure washer is on a level surface. _i, WARNING Unintentional sparking can result in fire or Checkoil level as described in Checking Oil Level If needed,slowly pour oil into oil fill opening to the point _¢...

  • Page 19: Specifications

    Service Air Cleaner Inspect Muffler and Spark Arrester Your engine will not run properly and may be damaged if you Inspect the muffler for cracks, corrosion, or other damage. run it with a dirty air cleaner. Service more often if operating Removethe spark arrester, if equipped, and inspect for under dirty or dusty conditions.
  • Page 20 AFTEREACHUSE Disconnect hose from spray gun and high pressure outlet on pump. Drain water from hose, gun, and spray Water should not remain in the unit for long periods of time. tip extension. Use a rag to wipe off the hose. Sediments or minerals can deposit on pump parts and "freeze"...
  • Page 21 WINTERSTORAGE There is no need to drain gasoline from the engine if a fuel stabilizer is added according to instructions. Run the engine for 2 minutes to circulate the stabilizer throughout the fuel NOTICE You must protect your unit from freezing system.
  • Page 22 Cause Problem Correction PrecisionSpray Selector is in a Rotate PrecisionSpray Selector to a low pressure position. high pressure position. Water inlet is blocked. Clear inlet. Inadequatewater supply. Provide adequatewater flow. Inlet hose is kinked or leaking. Straighten inlet hose, patch leak. Pump has following problems: Checkand clean inlet hose strainer.
  • Page 23 SNAPPER3100 PSI Pressure Washer 580.752660 Main Unit -- Exploded View and Parts List -- S C%" t \\\\ 1 _, Item Part # Items Not Illustrated Description 209324GS BASE,w/Vib Mounts Part # Description AG208900GS HANDLE 208992GS MANUAL, Operator's 192134GS 191267SGS...
  • Page 24 ENGINE, Briggs & Stratton, 12T412 - Exploded View 12191 746 % 741 _ 32 _ 914A 914B 1022 % 1029 1022 ® ® 1034...
  • Page 25 ENGINE, Briggs & Stratton, 12T412 - Exploded View 108 % 130 % 95 _' 1270 1331_ lO4 % _137 601A _<) 652A 1095 VALVE CASKET 868 (_ 1022 CARBURETOR OVERHAUL %t:_ 127 0 633A ENGINE GASKET % 1o3% lo22 __[]_ 883 _...
  • Page 26 ENGINE, Briggs & Stratton, 12T412 - Exploded View 425 _;_ 2o9A 613A 632_ 613 _ 3331 "_ 163 @ 281%_663 1070 1005 ® 1210 1211...
  • Page 27 ENGINE, Briggs & Stratton, 12T412 - Parts List Item Part# Item Part # Description Description 795219 697322 Cylinder Assembly Housing-Blower 699480 399269 Kit-Bushing/Seal (Magneto Side) Screw (Blower Housing) 795334 299819s SeaFOil (Magneto Side) Shield-Cylinder 699483 699486 Head-Cylinder Screw (Cylinder Shield) 792723 698210 Gasket-Cylinder Head...

  • Page 28: Maintenance

    California, U.S. EPA, and Sears Emissions Sears EmissionsControlWarranty Provisions Control Warranty Statement The following are specific provisions relative to your Emissions Control Warranty Coverage. It is in addition to the YourWarranty RightsAnd Obligations Searsengine warranty for non-regulated engines found in The California Air Resources Board, U.S.
  • Page 29 The warranty onemissions-related parts isasfollows: LookFor Relevant EmissionsDurability Period and Air Index InformationOnYour Engine EmissionsLabel • Any warranted part t hatis notscheduled replacement asrequired maintenance intheowner's Enginesthat are certified to meet the California Air Resources manual supplied, iswarranted forthewarranty period Board (CARB) Emissions Standard must display information stated a bove.

  • Page 32: Sears, Roebuck And Co., Hoffman Estates, Il

    GARANT|ALIMITADA DE DOSANOSDE SNAPPER Durante el primero a_o a partir de la fecha de compra, si este producto de Snapper falla debido a defectos de materiales o mane, devu61valoa cualquier almac6n Sears o centre de reparaciOny repuestos de los Estados Unidos para su reparaciOn g ratuita.
  • Page 33 A, ADVERTENCIA El escape del motor de este producto estemanualminuciosamente y conozca a fondo las partes y el funcionamiento desum_quina limpiadora a contiene elementos qufmicos reconocidos en el Estado de presi6n.Conozca susaplicaciones, suslimitaciones y los California por producir cancer, defectos de nacimiento u peligros involucrados.
  • Page 34 A. ADVERTENCIA La gasolina y sus vapores son A, ADVERTENCIA El retroceso (repliegue r_.pido) del extremadamenteinflamables y cable del arrancador puede producir lesiones. El explosivos. retroceso impedir_, que el usuario suelte el cable a El fuego ouna explosiCn pueden causar tiempo y tirar_, de su mano y brazo hacia el motor.
  • Page 35 AVISO El rociado de alta presi6n puede da_ar elementos _i, ADVERTENCIA El chorro de agua a alta presi6n que fr_.giles, incluyendo el vidrio. • NO dirija la pistola rociadora hacia un cristal cuando utilice la los tejidos subcut_.neos, provocando lesiones de este equipo produce, puede atravesar la piel y boquilla MAX (punta de alfiler).
  • Page 36 CONOZCA SU MAQUINALIMPIADORAA PRESION Lea el Manual del Operario y las reglas de seguridadantes de poner en marcha su limpiadora a presi6n. Compare las ilustraciones con su limpiadora a presi6n para familiarizarse con las ubicaciones de los diferentes controles y ajustes. Guarde este manual para referencias futuras.
  • Page 37 Su limpiadora apresi6n requiere decierto e nsamble yestar_ lista Conecte el Asa y Limpiar el Tanque para s er usado t_nicamente despu6s dehaber depositado 1. Coloque el asa (A) sobre los soportes del mismo (B) que ya combustible yelaceite recomendado. est_n adheridos a la unidad principal.
  • Page 38 Inserte el gancho de alambre de soporte (A) de la pistola a Agregue Gasolina trav_s del orificio situado justo encima del limpiar el tanque en el derecho de la asa (visto desde la parte delanterade la unidad). El combustible debe reunir los siguientes requisitos: Sujete el gancho de alambre en su posici6n y coloque un perilla •...
  • Page 39 3. Instale la tapa del tanque de combustible y la espera para algt_n Conectela Mangueray el Suministrode Aguaa la Bomba combustible rociado para evaporar. iPRECAUCI()N! Los combustibles con mezclade alcohol (gasohol, AVISO NO haga funcionar la bomba si no tiene el etanol o metanol) puedenatraer la humedady provocar la suministro conectado y abierto.
  • Page 40 Antes de que conecte la manguera de jardin a la entrada de _i, ADVERTENClA Riesgo de lesiones oculares. agua, inspeccione el colador de la entrada.Limpie el colador (A) El agua rociada puede salpicar o propulsar si tiene residuos o solicite su remplazo si est_ da_ado. NO haga objetos.
  • Page 41 COM0 USARSU LIMPIADORAA PRESION Para Poner en Marcha el Limpiadora a PresiGn Para darle arranque a su limpiadora a presi6n movido a motor por Si tiene problemas con el funcionamiento de su m_quina limpiadora primera vez, siga estas instrucciones paso a paso. Esta informaci6n a presi6n, por favor Ilame a la linea de ayuda de la m_quina acerca de la puesta en marcha inicial tambi_n es v_lida para cuando limpiadoraa presi6n al 1-800-317-7833.
  • Page 42 IMPORTANTE:Antes de arrancar la limpiadora a presiCn, asegt_rese 11. Cuando arranque el motor, mueva lentamente la palanca del ahogador a la posiciCn "En marcha" ("Run"). Si el motor falla, de ponerse gafas de seguridad como se describe a continuaciCn. mueva la palanca a la posiciCn "Ahogado"("Choke"), y despuCs a la posiciCn "En marcha"...
  • Page 43 C6mo Detener su Limpiadora a Presi6n AVISO El contacto con el silenciador a alta temperatura puede producir da_os en el tubo de inyecci6n de detergente. Suelte el gatillo de la pistola rociadora y deje funcionar el • Cuando coloque el filtro en la botella del detergente, coloque el motor al ralenti durante dos minutos.
  • Page 44 Aplique el detergente sobre la superficie seca, comenzando en Limpieza del tubo de inyecci6n de detergente la parte inferior del Areay dirigi_ndose hacia arriba, utilizando Si us6 el tubo, debe lavarlo con agua limpia antes de parar el motor. movimientos largos, parejos y superpuestos. Coloque el filtro y la inyecci6n de detergente en un balde Ileno 10.
  • Page 45 INFORMACIONTECNICASOBREEL MOTOR ESPECIFICACIONES DELPRODUCTO El motor es de uno cilindros, de v_lvulas en cabeza (OHV), Especificaciones de la M_quina Limpiadora a refrigerado por aire y de baja emisi6n. PresiGn En el Estado de California, los motores de la serie 120000 han Presi6n de salida m_xima ......
  • Page 46 PLAN DE MANTENIMIENTO Bomba de Aceite NO realice ninguna operaci6n de mantenimiento con el aceite de la Siga los intervalos de horas o de calendario, los que sucedan bomba. La bomba se suministra prelubricada y sellada en f_brica, y (se_aladas antes.
  • Page 47 Desconecteel selector PrecisionSpray de la pistola rociadora. Revise la Manguera de Alta Presi6n Utilice un peque_o clip para papel para eliminar todo material La manguera de alta presi6n pueden desarrollar fugas debido al desgaste, dobleces o abuso. Revise la manguera antes de cada uso. extra_o que pueda obstruir las boquillas (A).
  • Page 48 Adici6n de Aceite del Motor MANTENIMIENTODELMOTOR Coloque el limpiadora a presi6n sobre una superficie nivelada. _i, ADVERTENCIA Chispear involuntario puede tener Compruebe el nivel de aceite tal como se indica en la secci6n "_dh como resultado el fuego o el golpe Comprobaci6n del nivel de aceite.
  • Page 49 Servicio del Depurador de Aire Inspeccione el Silenciador y la Pantalla Apagachispas Su motor no funcionar_ adecuadamentey puede da_arse si usted Io hacefuncionar con un depurador de aire sucio. Suministre servicio Inspeccione que el silenciador no presente fisuras, corrosi6n u m_s frecuentemente si la unidad funciona bajo condiciones de otros da_os.
  • Page 50 DESPUESDE CADAUSO Desconectemanga del fusil del rocio y salida alta de presi6n en la bomba. Desag0e agua de la manga, del fusil, y de la No deber_,haber agua en la unidad por largos periodos de tiempo. extensi6n de boquilla. Use un harapo para quitar la manga. Los sedimentos de minerales se pueden depositar en partes de la Saque todos los liquidos de la bomba halando la manija de bombay "congelar"...
  • Page 51 ALMACENAMIENTO PARAINVIERNO Proteja el Sistema de Combustible Aditivo para Combustible: AVISO Usted deber_ proteger su unidad de las El combustible puedeestar pasado30 dias despu_s de su temperaturas de congelamiento. almacenamiento. El combustible pasadoprovoca la formaci6n de • Si no Io hace, da_ar_ permanentementela bombay la unidad no residuos _cidos y de carbonilla en el circuito de combustible yen podr_ funcionar.
  • Page 52 Problema Causa Soluci6n El selector PrecisionSpray est_ en una Gire el selector PrecisionSpray hasta una posici6n de baja presi6n. posici6n de alta presi6n. La entrada de agua est_ bloqueada. Limpie la entrada. Suministro de agua inadecuado. Proporcione flujo de agua adecuado. La manguera de entrada est_ doblada o Estire la manguera de entrada, coloque un presenta fugas.
  • Page 54 Sears,Roebuck andCo., U.S.A.(Sears),California AirResources Board (Consejo de Recursos s obreel Airede California, C ARB, p or sussiglasen ingles)y United StatesEnvironmental ProtectionAgency (Agencia deProtecci6nAmbiental d eEE.UU., EPA,porsus siglasen ingles). Declaraci6n degarantia del sistemadecontrol d e emisiones (derechos y obligaciones del propietario pare la garantia contra defectos) CaliforniaAir Resources Board(CARB),U.S.EPAy Searsle explicana continuaci6n •...
  • Page 55 InformaciGn sobre emisiones Algunos motores cuentan con la certificaci6n de cumplimiento de la fase 2 de las normas sobre emisiones de la United States Los motores con certificaci6n de cumplimiento de la normativa Environmental Protection Agency (USEPA,Agencia estadounidense sobre emisiones del California Air ResourcesBoard (CARB) deben de protecci6n del medioambiente ).

  • Page 56: Troubleshooting

    Your Home For expert troubleshooting and home solutions advice: www.managemyhome.com For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter made it, no matter who sold For the replacement parts, accessories owner's manuals that you need to do-it-yourself.