Table of Contents
Advertisement
PHILIPS CD-ROM D
U
RIVE
SER
8. (Optional connection for advanced PCA123CD users
only )
Use an audio cable with two 2-pin Molex
connectors to connect an audio output device that
accepts digital audio input to the drive's "
" connector.
provides purer sound output than the analog audio
connector.
9. Secure the drive with the supplied four screws.
10. Replace your PC's casing and reconnect the power
supply.
This completes the hardware installation.
2.2 Letting Your System Recognize
the Drive
For your system to recognize the new CD-ROM drive, you
need an appropriate driver to act as the system's "eye
opener."
In normal cases, either Windows 95 or OS/2
Warp should have no problem recognizing the drive with
the OS's built-in standard IDE CD-ROM driver.
the drive in DOS and Windows 3.1, however, you need to
install the supplied device driver.
2.2.1 If You Are a DOS or Windows 3.x
User
Perform the following steps:
1. Boot your computer.
2. Identify the directory that contains the file
.
Note: MSCDEX.EXE comes with DOS 6.0 and above.
DOS 6.x, the file is typically located in
your DOS directory.
Windows 95,
6
'
M
S
ANUAL
The digital audio connector
For DOS installed with
it is typically located in your
To use
For
2
Advertisement
Table of Contents
