Download  Print this page

Philips PCA103CD User Manual

Cd-rom drive.
Hide thumbs

Advertisement

PHILIPS CD-ROM Drive
User's Manual
PCA103CD
PCA123CD

Advertisement

Table of Contents

   Related Manuals for Philips PCA103CD

   Summary of Contents for Philips PCA103CD

  • Page 1 PHILIPS CD-ROM Drive User’s Manual PCA103CD PCA123CD...
  • Page 2: Table Of Contents

    Table of Contents Chapter 1 INTRODUCTION ......1 1.1 Features ........1 1.2 Package Contents ......2 1.3 System Requirements ......2 Chapter 2 INSTALLING YOUR DRIVE ....3 2.1 Installing the CD-ROM Drive ....3 2.2 Letting Your System Recognize the Drive ..5 2.2.1 If You Are a DOS or Windows 3.x User........5 2.2.2 If You Are a Windows 95 User..........6 2.2.3 If You Are an OS/2 Warp User ..........9 Chapter 3...
  • Page 3 Philips and the Philips logo are registered trademarks of Philips Electronics N.V. All other company names...
  • Page 4 and product names are trademarks and registered trademarks of their respective owners. Printed in Taiwan...
  • Page 5 FCC Notice (USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in...
  • Page 6 Notice 3: This product complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating Electromagnetic Compatibility (89/336/EEC). For the evaluation regarding the electromagnetic compatibility, the following standards were applied: 082-1, IEC 801-2, IEC 801-3,...
  • Page 7 Klass 1 laser apparat (EN 60825: 1991) Additional remarks: VAROITUS - Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turyallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. Varning - Om apparaten används pä annat sätt än i denna bruksanvisning specificerats, kan användaren utsättas för osynlig lasersträlning, som överskrider gränsen för laserkläss 1.
  • Page 8 Important Safety Notice 1. Follow all warnings and instructions marked on the product. 2. Danger: Invisible laser radiation when open. Avoid direct exposure to beam. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
  • Page 9 2. GEVAAR: Bij het demonteren van dit produkt kunt u worden blootgesteld aan onzichtbare laserstraling. Vermijd directe blootstelling aan laserstraling. 3. Trek de stekker van de PC uit het stopcontact voordat u dit produkt schoonmaakt. Gebruik geen vloeibaar reinigingsmiddel of spuitbussen. Gebruik voor het schoonmaken alleen een vochtige doek.
  • Page 10 2. Danger : Cet appareil émet des radiations laser invisibles lorsqu'il est ouvert. Veillez à éviter toute exposition directe aux rayons laser. 3. Débranchez votre ordinateur avant de procéder au nettoyage de l'appareil. N'utilisez pas de produit liquide ou d'aérosol de nettoyage. Utilisez plutôt un chiffon propre et humide.
  • Page 11 2. Gefahr: Im geöffneten Zustand kann unsichtbare Laserstrahlung entweichen. Vermeiden Sie den direkten Kontakt mit Laserstrahlen. 3. Ziehen Sie den Netzstecker Ihres PC aus der Steckdose, bevor Sie dieses Produkt reinigen. Verwenden Sie keine flüssigen Reinigungsmittel oder Reinigungssprays. Reinigen Sie das Produkt, falls notwendig, mit einem feuchten Tuch.
  • Page 12 Precauzioni Importanti 1. Seguire tutte le istruzioni e precauzioni indicate sul prodotto. 2. Pericolo! Quando l’unità è aperta, c’è una radiazione laser invisibile. Evitare l’esposizione ai raggi laser. 3. Disinserire la spina del PC dalla presa di corrente prima di effettuare operazioni di pulizia sul prodotto.
  • Page 13 Importante Advertencia de Seguridad 1. Tenga en cuenta todas las advertencias e instrucciones marcadas en el producto. 2. Peligro: Radiación láser invisible al estar abierto. Evite quedar expuesto directamente a rayos láser. 3. Desenchufe su PC de la toma de corriente antes de limpiar este producto.
  • Page 14: Chapter 1 Introduction

    1.1 Features This CD-ROM drive has the following key features: IDE/ATAPI interface Access time at 170 ms for PCA103CD and 150 ms for PCA123CD Data transfer rate at 1,500 KB/sec for PCA103CD and 1800 KB/sec for PCA123CD...
  • Page 15: Package Contents

    PHILIPS CD-ROM D ’ RIVE ANUAL movies), Karaoke-CD, CD Extra (CD+), I-trax CD and Photo-CD (both single and multi-session) Front-panel Stop/Eject, audio Play/Skip track control Compatibility with Windows 3.1, Windows 95 and OS/2 Note: The use of the IDE/ATAPI interface means that you can use your PC’s existing IDE interface to set...
  • Page 16 Please read this manual thoroughly before installing or using your new CD-ROM drive.
  • Page 17: Chapter 2 Installing Your Drive

    INSTALLING YOUR DRIVE This chapter guides you through the installation of your new CD-ROM drive. To install the drive, your PC must have a free IDE interface connector, or you must buy an IDE controller card from a computer retailer. (An Enhanced IDE controller card is required if your PC already has a one-port IDE controller).
  • Page 18 IDE Cabel Power Cabel Figure 2-2 Back Panel Connections Note: Figure 2-2 shows the back panel of PCA123CD. PCA103CD looks slightly different. It has four additional jumpers to the right of the Power connector and has only one audio (analog...
  • Page 19 IDE port. 7. If you have a sound card with a 4-pin CD-ROM audio connector, use the supplied audio cable to connect     it to the drive’s “ ” connector (the  “ ” connector on PCA103CD).
  • Page 20: Letting Your System Recognize The Drive

    PHILIPS CD-ROM D ’ RIVE ANUAL 8. (Optional connection for advanced PCA123CD users only ) Use an audio cable with two 2-pin Molex connectors to connect an audio output device that   accepts digital audio input to the drive’s “...
  • Page 21: If You Are A Windows 95 User

    CD-ROM drive has been correctly set as a master device or a slave device (see Appendix A for instructions). If this still does not solve the problem, contact your Philips distributor or representative. 2.2.2 If You Are a Windows 95 User Perform the following steps: 1.
  • Page 22 PHILIPS CD-ROM D ’ RIVE ANUAL # $%  3. Double click the icon on the desktop and check whether the CD-ROM icon appears as in the following window: Figure 2-3 “My Computer” Peripherals     4. Double click the folder in the same     window.
  • Page 23 NSTALLING RIVE Figure 2-5 The “System Properties” Folder &   6. Click the tab and check whether the CD-ROM drive is listed. If the CD-ROM icon is listed in both Step 3 and this step, you can stop here. Windows 95 has successfully recognized your new CD-ROM drive.
  • Page 24: If You Are An Os/2 Warp User

    PHILIPS CD-ROM D ’ RIVE ANUAL the instructions in Section 2.2.1 and install the supplied device driver under that DOS mode. Why couldn’t I install Windows 95 with its CD disc? Is my CD-ROM defective? Your CD-ROM probably had nothing to do with that problem.
  • Page 25 NSTALLING RIVE Figure 2-6 The “System Configuration” Dialog Box " ' !" 2. Click the CD icon, select from the & %% "( list box and click the button. Follow the screen instructions until the installation is completed. 3. Reboot your PC. ")* # $ 4.
  • Page 26 PHILIPS CD-ROM D ’ RIVE ANUAL Figure 2-7 The “OS/2 System - Icon View” Window & 5. Double click the icon and check whether the CD- &  ROM icon ( ) appears as in the following list of available drives: Figure 2-8 The “Drives - Icon View”...
  • Page 27 NSTALLING RIVE ")* ,  8. Double click the icon. An OS/2 window appears: Figure 2-10 “OS/2 Window” 9. At the command prompt, type:     10. At the end of the opened CONFIG.SYS file, add the following line:    11. Close the file after saving it and reboot your PC. 12.
  • Page 28 PHILIPS CD-ROM D ’ RIVE ANUAL working properly with your IDE controller. Try the diskette version. This page is intentionally left blank.
  • Page 29: Chapter 3 Using Your Cd-rom Drive

    USING YOUR CD-ROM DRIVE 3.1 Drive Applications There are two main ways in which you will use your new CD-ROM drive. The first way is as a typical disk drive (albeit read-only). Here, data such as program files, databases, sound clips, video images, etc. is read from the CD into your PC's CPU.
  • Page 30 PHILIP CD-ROM D ’ RIVE ANUAL Disc Tray Opens or closes for disc loading and removal Headphone For optional connection to jack headphones or self-amplified speakers. Headphone Adjusts the volume level of sound volume control coming out from the headphone jack Lights up when disc is first put LED indicator into the tray or ready for access;...
  • Page 31: Appendix A A Master Or A Slave Device

    A MASTER OR A SLAVE DEVICE? Before sliding your CD-ROM drive into the 5.25” drive bay, you have to decide whether the drive is going to be a master or slave device by adjusting the jumpers on its back. This appendix presents some basic concepts of IDE connections to help you make the decision and describes the way to set the jumpers.
  • Page 32 PHILIPS CD-ROM D ’ RIVE ANUAL...
  • Page 33 ASTER OR A LAVE EVICE IDE controllers may contain more than one port and hence contain more than one IDE cable. Such a controller is called an enhanced IDE controller. ports are called the primary port, secondary port, tertiary port, etc., usually labeled by the side of the ports.
  • Page 34 PHILIPS CD-ROM D ’ RIVE ANUAL port. As a result, if you have more than one IDE device, their assignments may look similar to the following:...
  • Page 35 ASTER OR A LAVE EVICE Device 1 Primary master (boot drive) Device 2 Primary slave Device 3 Secondary master Device 4 Secondary slave Device 5 Tertiary master Device 6 Tertiary slave Note that the primary master, if configured, must be a boot drive (normally a hard disk).
  • Page 36: Setting Master And Slave Jumpers

    PHILIPS CD-ROM D ’ RIVE ANUAL A.2 Setting Master and Slave Jumpers Whether your PC system regards your CD-ROM drive as a master device or a slave device depends on which of the “ ” (master) and “ ” (slave) jumpers on the back of the drive is capped.
  • Page 37 ASTER OR A LAVE EVICE...
  • Page 38: Specifications

    SPECIFICATIONS Interface Drive interface type: ATAPI IDE (conforms to SFF8020 V1.2) Disc formats: Audio-CD, CD-ROM (mode 1 and mode 2) CD-ROM/XA (mode 2, form 1 and form Video-CD, CD-i/FMV (CD-i movies) CD Extra (CD+), I-trax Photo-CD (single and multisession) Disc size: 80 and 120 mm Performance 1,500 KB/sec (10X), 1,800...
  • Page 39: Physical Characteristics

    PHILIPS CD-ROM D ’ RIVE ANUAL Temperature: ~ +45 C -20 ~ +55 F ~ +113 F ~ +131 Humidity: 20% - 80% RH, 20% - 80% RH, Physical Characteristics Dimension: 149 x 42 x 196.5 mm (W x H x D)

This manual is also suitable for:

Pca123cd

Comments to this Manuals

Symbols: 0
Latest comments: