Pentax OPTIO WS80 Operating Manual page 81

Problem i Cause . Remedy
The battery is not Check if a battery is installed. If not,
installed install a battery.
Check orientation of the battery. Reinsert
The camera will The battery is installed
the battery according to the _ O symbols
not turn on incorrectly in the battery compartment (p.36).
The battery is
exhausted Charge the battery.
The camera is
The display is off when the camera is
connected to a
No image appears computer connected to a computer.
on the display
The camera is The display is off when the camera is
connected to a TV connected to a TV.
The brightness level of Adjust the brightness level in [Brightness
the display is set too Level] in the [_k Setting] menu (p.202).
dark
The display is
hard to see
Power Saving function
is on
When the Power Saving function is on,
the display automatically darkens after a
certain amount of time. Press a button to
return to the normal brightness level.
Select [Off] in [Power Saving] in the
[_k Setting] menu to turn the Power
Saving function off (p.203).
Pictures cannot be taken while the flash
is charging. Wait until charging is
finished.
The flash is charging
The shutter will There is no available
Insert an SD Memory Card with available
not release space on the SD
space or delete unwanted images (p.42,
Memory Card or in the p.150).
built-in memory
Recording Wait until recording is finished.
The picture is dark The subject is too far
away in a dark The picture becomes dark if the subject is
when using the environment, such as too far away. Take pictures within the
flash a night scene specified flash range.