Pentax OPTIO WS80 Operating Manual page 187

Problem i Cause . Remedy
The subject is not
in focus
The subject is difficult
to focus on with
autofocus
The subject is not in
the focusing area
The flash mode is set
to @
The drive mode is set
Theflash does not to _ or _H_
discharge The focus mode is set
to _1,
The shooting mode is
set to _, ;_ or _
The camera may have difficulty in
focusing on such subjects as: low
contrast subjects (a white wall, a blue
sky, etc.), dark subjects, finely-patterned
objects, rapidly-moving objects. It is also
difficult to get proper focus when
shooting through a window or a net. Try
shooting using the focus lock (p.72), or
Manual Focus (p.108).
Locate the desired subject in the focus
frame (focusing area)in the center of the
display. If it is difficult to do so, first lock
the focus on the desired subject (focus
lock), and then move the camera to
recompose.
Setto $-A(Auto) or _- (Flash On) (p.105).
The flash does not discharge in these
modes.
Very occasional!y, static electdcity may Cause camera malfunction: In
this case, remove the battery and install it again. If the camera
working properly, normal condition is restore d an d you can continue
using the camera. ..................