Pentax OPTIO WS80 Operating Manual page 46

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_
t ilii .....
You can save battery power by setting the display to dim automatically iiiiiiiiiiiiiiiiiiiiiii
when no operation is performed for a fixed time. After the power saving iiiiiiiiiiiiiiiiii
function has been activated, the display returns to the ordinary iiiiiiiiiiiiiiiiiiiiiii
brightness if any button is pressed, iiiiiiiiiiiiiiiiiiiiiii
Press the MENU button in I-_ mode. iiiiiiiiiiiiiiiiii
The ['_ Setting] menu appears, iiiiiiiiiiiiiiiiiiiiiii
When you press the MENU button in I_ mode, press the four-way iiiiiiiiiiiiiiiiiiiiiii
controller (I_) once. iiiiiiiiiiiiiiiiiiiiiii
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Use the four-way controller (• T) to select [Power iiiiiiiiiiiiiiiiii
Saving]. iiiiiiiiiiiiiiiiii
3 Press the four-way controller (_).
A pull-down menu appears.
#
Use the four-way controller (• T)
to select the time until the camera
enters power saving mode.
Choose from [2min.], [1 min.], [30sec.],
[15sec.], [5sec.] or [Off].
USB Connection
Video Out Jlmin. J
Br!gh!ness Leve ! 130eec. J
15se c. J
Auio Power Off
Reset IOff _
i_Cancel _OK
5 Press the OK button.
The setting is saved.
• Power Saving does not function in the following situations:
- While taking pictures in _ (Continuous Shooting) mode
- In the playback mode
- While recording a movie
- While the camera _sconnected to a computer
- When using the AC adapter
- While a menu is being displayed
• When no operation is performed after the camera is turned on. Power
Saving is activated only after 15 seconds elapse even if [5sec.] is set.