Part Identification Chart - NordicTrack E5.7 NTELO5011.0 User Manual

PART iDENTiFiCATiON CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M5 Washer
(132)-2
M4 x 16mm
Screw (101)-16
M10 x 25mm
Button Screw
(131)-4
[
M8 Washer
(97)-8
M6 x 12mm Button
Screw (103)-8
M10 Split
Washer (105)-8
M8 x 13mm
Button Screw (82)-8
16mm Wave
Washer (54)-2
M8 Locknut
(102)-4
M8 x 38mm
Button Bolt (96)-4
M10 x 122mm
Button Screw (104)-4
5