Nexgrill 720-0825 Manual page 15

,
a)
b)
c)
d)
e)
10.
Side Burner Shelf Assembly
Loosen but do not remove the screw which
is pre-assembled on the cart leg. Remove
the two screws that are attached to the Side
Burner Shelf (D) frame and the two screws that
are attached to the main control panel.
Align the holes on Side Burner Shelf (D) with
the loosened screws located on the cart leg.
Secure Side Burner Shelf (D) from inside firebox
using two screws that were removed in step 9a to
attach the Side Burner Shelf (D) to the main firebox.
Secure the Side Burner Shelf Control Panel (D)
and main control panel by one screw which is
pre-assembled on the main control panel. As
shown in Fig. 12. Tighten all screws.
Tighten screws loosened in 9b. Ensure all screws
are tight.
Left Side Shelf Assembly
Repeat Step 9 to assemble Left Side Shelf (E).
As shown in Fig.13.
Fig. 12
Fig. 13
D
11.
a)
Side Burner Valve Installation
Remove the two 4mm screws with
locking washers that are pre-attached
to the valve. Then place the Bezel (L)
on the Side Burner Shelf (D) control
panel. From underneath, insert
the side burner valve into the Side
Burner Shelf (D) control panel and Bezel (L).
Align the holes in the Bezel (L) with holes in
the valve and attach with two 4mm screws.
The two screws hold the bezel, control panel,
and valve together. As shown in Fig. 14.
Fig. 14
L
D
15