Nexgrill 720-0825 Manual page 13

,
a)
b)
Wheel Assembly
Remove the nuts and washers which are
pre-assembled on the short axle, place the
wheels (C) on the Axle attached to Cart Leg,
Front Right (I) and Cart Leg, Back Right (J).
As show in Fig. 7.
Place washers closest to the wheel and then
place and tighten the nuts on the axle that were
removed in step 5a.
Fig. 7
C
/
6. Diagonal Bar Barrier Assembly
Loosen but do not remove the one screw
which is pre-assembled on the Bottom Panel (B).
Secure solid end of the Diagonal Bar Barrier (Y)
to the underside of the Front Panel (S), then
secure other end of Diagonal Bar Barrier (Y) by
clipping the open hole onto the screw which
pre-assembled on the Bottom Panel (B). Tighten
the loosened screw. As show in Fig. 8.
Fig. 8
S
\
B
Y
7. Cart Beam Assembly
Insert the Cart Beam (R) into Cart Leg,
Back Left (G) and Cart Leg, Back Right (J),
aligning the holes. The Cart Beam (R) will fit
into holes as shown in Fig. 9. Secure the Cart
Beam by pressing it firmly into the holes of the
Cart Legs.
Fig. 9
G
R
J
13